To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt Trailer Hitch Receiver is built for real-world use, whether you’re towing a small trailer or hauling gear for the weekend. With a gross trailer weight rating of 6,000 lbs and a tongue weight rating of 900 lbs, it’s ready for everyday towing without compromise. The standard 2" x 2" receiver opening works with most common accessories like bike racks, cargo carriers, and ball mounts, so you can use the gear you already own.
If you don’t like hardware hanging down below the bumper, this hitch keeps things tidy. The concealed cross tube hides most of the structure behind the bumper, leaving only the 2" receiver visible for a clean look. The gloss black powder coat finish sits over a protective base coat to help fight rust and corrosion, keeping the hitch looking sharp through seasons of use.
Getting this hitch installed doesn’t take special tools or a lift. The fully welded design bolts directly to the frame, using precision robotic welds that line up with factory mounting points—no drilling or welding needed. It comes complete with mounting hardware and instructions so you can get it installed and be on your way faster.
The square-tube steel construction gives this hitch its solid feel and long-term durability. It’s fully welded for maximum strength and assembled in the USA with mounting hardware that may be imported. Designed to last as long as your vehicle, it’s a dependable foundation for towing and hauling year after year.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
You need to supply a small paper template for the cut out of the rear plastic piece and also the last two holes in the mount need to have more of a slot in them to allow for more of an easy install so that you dont have to drill some space in the slots. We all don't have car lifts .
Great product, we have been relying on this hitch for over a year now and no complaints
Easy to install and look super clean
Good product, with only one complaint. I was only able to screw in 5 of the 6 bolts on the 20205 Nissan Pathfinder I installed it on. Given the size and location of the holes on the hitch, you can only screw in 5 bolts and the 6th will be slightly out of line with the female end on your vehicles frame therefore not allowing you to screw in the 6th and final bolt. I am sure it will be strong enough with 5/6 but still kinda annoying and makes you wonder how they missed that when they were engineering the hitch?
I am an accountant by trade so I enlisted a friend to help me with the trimming of the lower bumper panel. It took us longer than the video to install but overall I am very happy with the hitch receiver. The packaging on delivery was damaged and open but there was no damage (all bolts & washers accounted). This is not my first hitch receiver. I rated this based on price, quick delivery and the quality.
Kenneth
3/5/2025
The receiver has a great addition to the Pathfinder. We mainly use it with our cargo carrier but potentially we may add a small trailer or bike rack into our inventory.
Robin H.
3/5/2025
Well built product
worked well, took a bit to trim the plastic bumper, wife was a little worried about me cutting on her $60,000 car with a sawzall, but it all worked out!
Very easy to install. It is heavy so I recommend 2 people. My brother and I had it installed in less than 30 minutes including removing a small portion of the underside of bumper with a dremel.
One bit of warning since it is lower than where the factory hitch would be I do scrap the hitch from time to time when on a steep incline or decline, like a steep driveway or a parking garage. The scrap is jarring to hear inside the car but the hitch is fine and keeps going. I recommend pulling into steep driveways at an angle, haven’t scraped since.
Jenny N.
1/4/2024
Keeping the hitch at an angle does the job, however I recommend considering part # RM-050 which is the Rollaway hitch protector from Roadmaster. It can help with vehicles where the hitch is lower to the ground.
Fit with minor trim to plastic under bu mper
Great hitch, great easy, smooth transac tion
Absolutely love the new hitch!
I struggled with getting the last bolt in and finally used a drift pin punch to align the hole and that did the trick...
Prefect fit. Easy install.
Excellent service from Etrailer! My 4th purchase. Great support, easy recommendation.
Price was very good for the receiver and the wiring kit. Delivery was very fast and the hitch was packed very good and secure in the box. Unfortunately the installation was somewhat difficult, because the mounting holes on the receiver did not align right with the frame of the vehicle.
Fit 2026 Nissan Pathfinder well. Note: you do not need to trim the bumper like the instructions say.
The hitch was an easy install and saved me money by being able to install myself.
Fast shipping and product was easy to install bolts lined up perfectly easy. Only thing is the instructions say you have to take off the exhaust you don’t need to because it lines up perfect
I have a 2022 nissan pathfinder fit with no issues! The only reason I didn't give 5 star is due to the chain hookups. Wish they would have been solid metal instead of wielded ring.
Gwendolyn Y.
3/5/2026
Looks awesome, Ben! Looks like you're using it to carry a bike rack?
Hi quality, heavy duty and the hardware and bolt holes lined up and fit well.
Great product. Easy to install. Bolt holes don't all line up, but that's to be expected with after market equipment. Easy enough to drill out. Received product in just two days.
Nice finish, instructions/video was very helpful. The tedious part was cleaning out the bolt holes that were rusty and dirty and this was on a 2 year old vehicle, so if you live in the rust belt, cleaning the mounting holes will need to be done
Fast shipping. Easy to follow instructions. Fit perfect. Seems to be of very good quality. Very pleased with purchase.
At the end of the day you folks need to look at yourself in the mirror and say I did it right and am proud of myself and the highest level of customer service. Great product great packaging and great service keeping the customer in the loop as to what’s happening to your order.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Kate F.
10/29/2025
I am sorry to hear that the 6th hole did not line up, you definitely want to use all the provided hardware Beau. Is the hole not lining up from front to back, or from side to side like it is flexed out of place? The hitches are made to be able to flex, so that it doesn't damage the frame of the vehicle, I am trying to figure out if they put the hole out of place, of it the hitch was flexed out of position.