LED Trailer License Plate Light with Mounting Bracket Spec Review Video

The spindle dimensions are as follows: A is the mounting dimension, B is the seal dimension, C is the inner bearing surface, D is the outer bearing surface and E is the diameter of the threaded portion of the spindle for spindle nut selection. Say…

The Replacement Thumb Turn Cam Latch Cylinder part #295-000012 has a 3/4" diameter with 1-1/8" long body measured at the threads. This appears to match what you have listed in the photos so it should be a direct fit replacement by just…

The Optronics LED Trailer License Plate Light with Bracket - Submersible #LPL56CB is submersible and will work with your trailer. On The LED Trailer License Plate Light with Mounting Bracket #328-003-70BE if the lights are submerged they will stop…

To determine your spindle size, you can either pull one hub off your trailer and look at the bearing numbers on the face of the inner and the outer bearing, or you can measure the spindle itself. I've attached an article and a photo to assist. If…

To mount the Channel Tongue Trailer Coupler - Trigger Latch - Bolt On #CT-5003-Z, I recommend using 1/2 inch bolts. The higher the grade, the stronger the bolt. I've attached the review video to help as you plan this installation.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

I have a solution for you to hook up the Optronics LED Trailer License Plate Light w/ Bracket #LPL55CB to your 2021 Subaru Ascent without tapping into the wiring. You could install Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector -…

I am not 100 percent sure what you are asking but it sounds from what I can gather that your bearings don't fit? If that is indeed the case then you need to ensure you have the right size bearings, and there are only two ways to accomplish that.…

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice in the…

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

If you really wanted to you could remove the 1-7/8 inch ball of the Flint Hill Goods Trailer Dolly part #FHG24ZR and install a different ball size...BUT it won't gain you anything by doing so and would only prevent you from using it with a…