Recommended Tonneau Cover for a 2015 Toyota Tacoma

Question

Question:

Cant see the specs on # e25DR yet. Is it confirmed to fit the Tacomas 5 foot bed?

asked by: Ryan

0

Expert Reply:

Hey Ryan, the etrailer Soft Tonneau Cover # e25DR you're looking at is not going to fit your Tacoma. Instead, I recommend going with the Extang E-Series Soft Tonneau Cover # EX65UV.

It's a bit higher in price than the etrailer cover, but it's got the same soft folding design, and will 100% fit your Tacoma.

expert reply by: Bryce D

0

Answer 1

Since your 2014 Toyota Tacoma with a 5 foot bed would have the Trifecta part #EX94905 the correct replacement tarp would be the #EX99FR.

view full answer...

Answer 2

There are two factors in determining which replacement tarp you need. The first is the size of your 2012 Toyota Tacoma's truck. The Extang Trifecta was made for the 5 foot bed and the 6 foot bed. The second factor is if you have the standard…

view full answer...

Answer 3

I was able to use the cover part number you provided, 060308-44630, to confirm with my contact at Extang which replacement parts you need. For the Cab Clamp use part #EX1034; for the Tailgate Hinge use #EX1033; and for the tarp portion use part…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Tonneau Cover for a 2015 Toyota Tacoma

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching