Is The 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate # MR37ZR Bare Steel?

Question

Question:

Is MORryde RPB77-006, Gooseneck Adapter Plate powder coated black by MORryde? Etrailer pictures show it bare metal but MORryde shows it painted. Also is the reinforcing plate welded to the Heavy-Duty Skid Plate? Etrailer pictures show the plate welded to the Skid Plate but MORryde indicts that it is not.

asked by: Mike

0

Expert Reply:

The 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate # MR37ZR (RPB77-006) used to come to use as bare steel since it is designed to be welded/drilled to a gooseneck adapter. Now it comes powder coated.

Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100
Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w/8" Offset # AM3139

expert reply by: Bud M

0

Answer 1

I do have a recommendation as based on your Dimensions it sounds like you have a Fabex 750 style pin box. Currently the Trailair Air Ride 5th Wheel King Pin #UF35-946212 is our only product that will bolt to this old pin box bolt pattern. To go to a…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Mark! Weigh Safe does not offer a locking pin for the True Tow #WS94RR hitch ball. I'm sure the thinking behind it is that you're either towing with a trailer hooked up so the ball can't be removed, or you aren't towing and store…

view full answer...

Answer 9

Hey Charles. I didn't receive any pictures but they make those Rhino Boxes pretty easy to identify when they slap that giant label on the side pin box. If you would like to email me the pics directly you can send them to the email address you…

view full answer...

Is The 5th-Wheel-to-Gooseneck Coupler Adapter Mounting Plate # MR37ZR Bare Steel?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching