SuperSprings Kit that Fits 2021 Mercedes Sprinter 2500

Question

Question:

SSA55 SuperSprings. So of I purchase this product for my 2021 MB Sprinter 2500 4x4 do I have to buy these two other items to install? ITL-5 is Leaf Pack Clamp tool used for install. P12KT is Mounting Kit for this install.

asked by: Charles R

0

Expert Reply:

For your 2021 Mercedes Benz Sprinter 2500 all you need to install a SumperSprings kit is the part # SS62KV that you referenced. We kit all of the needed parts together with this part number which means it's the only part number you'll need.

expert reply by: Jameson C

0

Answer 1

The Super Springs SumoSprings Solo #SSF-106-40 is for the front axle suspension of the 2014 Mercedes-Benz Sprinter 2500 or 3500. The SumoSprings Maxim #SSR-336-54-1 is for the rear axle of the 3500. For your 2014 Mercedes-Benz Sprinter 2500, I…

view full answer...

Answer 2

I spoke with my contact at Timbren and the overall height (with spacers) for the part #TMBRSP35B that you referenced is 6-3/8 inch, the height of the #TMBRSP35A is 5-7/8 inch, and the #TMBRSP25A is 5-3/8 inch.

view full answer...

Answer 3

A certain amount of noise is normal with the Super Springs suspension stabilizers, especially on rough or uneven pavement. According to Super Springs, the bracket that attaches the Super Springs stabilizer to your truck's leaf springs has two…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver item #13358 does fit the 2022 Mercedes-Benz Sprinter 2500 with the factory step bumper. This hitch is custom fit and bolts to your Mercedes with included hardware. We have not heard of any issues with the rear…

view full answer...

Answer 8

Hey Kent, thanks for reaching out. We do have a sway bar for the 2024 Mercedes-Benz Sprinter 2500 with the single rear wheels. For that I recommend the following: - Hellwig Rear Anti-Sway Bar - 1-5/16" Diameter #HE54FR This is made specifically…

view full answer...

Answer 9

Hey Blake! We don't carry replacement leaf springs but we do have suspension enhancement for your Sprinter. For an option that reinforces your existing leaf springs I recommend the SuperSprings Custom Suspension Stabilizer and Sway Control Kit…

view full answer...

Answer 10

Hi JME; the Furrion Chill Cube Remote only works with the AC unit. It cannot operate a furnace. The ADB #LC64DX works with any duct style. Since this is a ducted setup you will need one of the following systems: -Furrion Chill Cube RV Air Conditioner…

view full answer...

Answer 11

Hey Tony! I'm going to save you a lot of trouble here. The Chill Cube Thermostat #LC74DX is absolutely terrible. We have had nothing but issues with this, and there has been endless back and forth with Furrion about it. Some people are able to…

view full answer...

Answer 12

Hey Derrick! The Dometic RV Furnace #DMC94RR will pretty much work with any RV thermostat that is capable of running a furnace. The only one that might give you trouble is the Furrion Chill Cube wall thermostat since it seems to have issues with a…

view full answer...

SuperSprings Kit that Fits 2021 Mercedes Sprinter 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching