Suspension Enhancement Recommendation for 2014 Mercedes-Benz Sprinter 2500

Question

Question:

How necessary is the maxim kit over the solo kit? What are the major differences in performance overall?

asked by: AJ

0

Expert Reply:

The Super Springs SumoSprings Solo # SSF-106-40 is for the front axle suspension of the 2014 Mercedes-Benz Sprinter 2500 or 3500. The SumoSprings Maxim # SSR-336-54-1 is for the rear axle of the 3500.

For your 2014 Mercedes-Benz Sprinter 2500, I recommend the Timbren Rear Suspension Enhancement System # TMBRSP25A. Trimbren's hollow rubber springs will replace the existing axle bump stops and works to increase stability, reduce rear end sag, and extend the life of your suspension.

expert reply by: Victoria B

0

Answer 1

For your 2021 Mercedes Benz Sprinter 2500 all you need to install a SumperSprings kit is the part #SS62KV that you referenced. We kit all of the needed parts together with this part number which means it's the only part number you'll need.

view full answer...

Answer 2

I spoke with my contact at Timbren and the overall height (with spacers) for the part #TMBRSP35B that you referenced is 6-3/8 inch, the height of the #TMBRSP35A is 5-7/8 inch, and the #TMBRSP25A is 5-3/8 inch.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 8

Hey Matthew, yes you will be able to reuse the thermostat rom your Dometic setup to operate the furnace of your RV with the Furrion Chill Cube part #FR99TD installed. The Chill Cube was supposed to work with furnaces but at this time they are still…

view full answer...

Answer 9

Hi JME; the Furrion Chill Cube Remote only works with the AC unit. It cannot operate a furnace. The ADB #LC64DX works with any duct style. Since this is a ducted setup you will need one of the following systems: -Furrion Chill Cube RV Air Conditioner…

view full answer...

Answer 10

Hey Tony! I'm going to save you a lot of trouble here. The Chill Cube Thermostat #LC74DX is absolutely terrible. We have had nothing but issues with this, and there has been endless back and forth with Furrion about it. Some people are able to…

view full answer...

Answer 11

Hey Derrick! The Dometic RV Furnace #DMC94RR will pretty much work with any RV thermostat that is capable of running a furnace. The only one that might give you trouble is the Furrion Chill Cube wall thermostat since it seems to have issues with a…

view full answer...

Suspension Enhancement Recommendation for 2014 Mercedes-Benz Sprinter 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching