Recommended Spacers for a Timbren Suspension Enhancement Kit

Question

Question:

My 2015 lifted Silverado 3500hd SRW already has rear Timbrens- will this T68MR Spacer fit my truck and application to take up the excessive gap and sag? Just want to sure this is the correct spacer kit.

asked by: Chris S

0

Expert Reply:

Welcome back! The Timbren Spacer Kit item # T68MR is exactly what you need. They have a 3/8" bolt hole opening that will work with the Timbren item # TGMRCK25D you purchased awhile ago. Timbren recommends a 1" gap between the jounce spring and your axle.

expert reply by: Jerred H

0

Answer 1

Hey Scott!! Welcome back, happy to hear you like your Timbrens. As far as a set of front ones go like item #TFF350SDC, unless you're using a snow plow, a front hitch, you've got a heavy duty front bumper, or you have plans of getting an in…

view full answer...

Answer 2

For your 2018 Chevy Silverado 2500 the Timbren kit part #TGMRCK25D is a confirmed fit and would work well. For in bed campers most people really like the SuperSprings like the part #SSA13MXKT as this provides additional support but also acts as an…

view full answer...

Answer 3

To better support the weight of your Arctic Fox 865 Camper I highly recommend the Timbren Rear Suspension Enhancement System #TGMRCK25D. These heavy-duty Aeon hollow rubber springs will greatly increase stability on the road with that camper…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 11

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Answer 12

If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…

view full answer...

Recommended Spacers for a Timbren Suspension Enhancement Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching