Recommended Trailer Hitch For a 2024 Chrysler Pacifica For Carrying 4 Bikes

Question

Question:

What trailer hitch would you recommend to carry 4 bikes with my 2024 Chrysler Pacifica Limited?

asked by: Melanie

0

Expert Reply:

I recommend installing the etrailer Trailer Hitch Receiver # e98903 on your 2024 Chrysler Pacifica. This has the larger 2" receiver opening which will allow you to carry the Yakima StageTwo Bike Rack for 4 Bikes # Y85AR. This is going to be the best bike rack as it slopes up in the back and will be less likely to drag on slopes since your Pacifica sits low to the ground.

The License Plate and Tail Light Kit # Y59VR will connect to your Pacifica with the Curt Powered Tail Light Converter # C47VV. This will provide a clear set of tail lights for other drivers to see since the 4 bikes will impair the view of the tail lights on your Pacifica.

expert reply by: Bud M

0

Answer 1

Hello Shara, thanks for reaching out. I see that you already ordered the #e98903 hitch which is for the 2025 Pacifica, but I wanted to reply anyway to make sure all your questions were answered. To answer your first question, we do have a video…

view full answer...

Answer 2

That's a ground strap that you have circled in your picture. You can basically run that to any metal bolt that touches the metal frame and you'd be fine, but if you were to use it on the same bolt it would have to go over the hitch flange and…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C13383 will fit your 2024 Chrysler Pacifica Touring Hybrid. This Class III hitch has a 2" receiver and a bolt-on installation. It also comes with a limited lifetime warranty. If you would prefer matte black…

view full answer...

Answer 4

The etrailer.com hitch part #e98903 is a confirmed fit for your 2020 Chrysler Pacifica Hybrid and does have a couple extra steps for the hybrid models. There's an emissions canister that needs to be relocated temporarily when installing the hitch…

view full answer...

Answer 5

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver item #76046-SK does not interfere with any back up sensors on your 2021 Chrysler Pacifica Hybrid. This is a custom fit hitch that bolts directly to your Pacifica with included hardware. Your hybrid model…

view full answer...

Answer 7

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

view full answer...

Answer 8

I have attached a video of the etrailer.com Trailer Hitch Receiver part #e98903 installed on the 2020 Chrysler Pacifica. We do have a video of an install on a 2018 which would be the same as your 2020 Chrysler Pacifica. The underbody panel does need…

view full answer...

Answer 9

Hey Kevin! The Curt Hitch item #C13383 does fit the hybrid models of the 2025 Chrysler Pacifica. You're going to want to replace the hardware though. You can't retorque those bolts when you reinstall the hitch on your new van. You'll need…

view full answer...

Answer 10

While we have not installed the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT92GR on a 2020 Chrysler Pacifica Hybrid, we have mounted the similar Draw-Tite Max-Frame Trailer Hitch Receiver #76046-SK. As these are both manufactured by Draw-Tite…

view full answer...

Answer 11

You will not need any type of extension because the distance from the center of the hitch pin hole to the edge of the bumper on your 2023 Chrysler Pacifica will be 5 inches, as you can see in the photo. The closest part of the T2 Classic will be just…

view full answer...

Answer 12

Hello Tim. For the Curt #C13383 hitch, there is a chance you will need to enlarge the holes for both Hybrid and non hybrid models. It completely depends on the size of the holes in the frame rail. There can be some variances in the size of these…

view full answer...

Recommended Trailer Hitch For a 2024 Chrysler Pacifica For Carrying 4 Bikes

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching