How to Determine Which Bearings are Needed for a 2006 Stratos Boat Trailer
Updated 11/30/2023 | Published 11/29/2023
Products Featured in This Question
Question:
Good morning. I have a 2006 stratos 180 fs boat. With the matching stratos trailer. I am looking into what bearings it takes and cannot quite figure it out. Do you perhaps know?
asked by: Tom E
Expert Reply:
The easiest way to find out what bearings your trailer takes is to first figure out what the axle capacity is. This usually can be found on an axle tag located on the center of the beam.
If you can't find anything on the axle beam, then you can try reaching out the manufacturer with the VIN and see if they'd be able to get that info for you.
Since your 2006 Stratos 180FS is a relatively small boat, you'll likely have a 2,000 or 2,200 lb axles in which you'd need # BK1-100 if you have 2,000 lb axles or # BK1-150 for 2,200 lb axles.
I've also attached a FAQ for you to check out that has some good info about picking the correct bearings.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit - BT8 Spindle, Bearings L44643, Races L44610, Seal 34823
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 1 3/8 x 1 3/8 hub
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer hubs and drums
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron
- Shop: Bearing Buddy Bearing Protectors - Model 1938 - Chrome Plated - Qty 2
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Video: Review of Caliber Boat Trailer Parts - Rollers - CA42AJ
- Video: In-Depth Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Review of Caliber Boat Trailer Parts - Rollers - CA72AJ
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Feature Review Dexter Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Review of Terran Industries Trailer Hubs and Drums - Hub 5 on 4-1-2 - TX33VJ
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Bearing Buddy and Bearing Kit Recommendation for 3,500 lb Axles
- Q&A: Replacement Bearings for Stratos Trail Trailer With 84545 Hub
- Q&A: Can The TruRyde #84 E-Z Lube Spindle TRU77FR Be Bolted Onto A Trailer Axle?
- Q&A: Replacement Idler Hub Needed for 3500 Pound Axle with 6 on 5-1/2 Bolt Pattern
- Q&A: Replacement Brakes, Hubs, and Spindles for 2000 Eagle Boat Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
on Trailer Bearings Races Seals Caps
