Replacement Brakes, Hubs, and Spindles for 2000 Eagle Boat Trailer
Updated 05/31/2023 | Published 05/30/2023
Products Featured in This Question
Question:
Hello. I have a single axle 2000 Eagle boat trailer that needs new drum brakes, hubs and spindles. The VIN number is 4JEBB201XY1237550. Can you help me find the correct parts? Thanks.
asked by: Erik D
Expert Reply:
In order to find the correct replacement parts for your 2000 Eagle boat trailer you will need to identify your axle. We have no way of looking up specific parts for your trailer. A good place to start would be with the axle tag. This should have the capacity or a serial number which can be used by the axle manufacturer to find the capacity.
If the tag is missing or worn you can pull off the hubs and use the bearings to identify what you need. Check and see if the part numbers are stamped into the bearings. If not, you can use a digital caliper like the # PTW80157 to measure the inner diameter. Check out the diagram below.
If I had to guess it is probably a 3,500 lb axle. If that is the case you can use # AKEBRK-35-SA for electric brakes and # AKFBBRK-35 for hydraulic. For a hub and drum assembly that uses the standard # L68149 inner and # L44649 outer bearing we have the # AKHD-545-35-EZ-K. For a spindle you could use the # TRU77FR which you will need to take to an axle shop to have welded on.
If you have a different axle capacity please let me know and I can help you find the right parts for your trailer. I have attached an article listing common bearing combinations by capacity for your reference as well.
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 3-1/8 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Search Results: ce13515
- Search Results: bb1980a~ss
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Installing TRU77FR Spindle
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: What Is The Speed Rating in Mile Per Hour for L on Trailer Tires?
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Search Results: trailer hubs and drums
- Q&A: Determining Which Idler Hub Assemblies Will Replace Hub and Drum Assemblies On 19' Boat Trailer
- Search Results: bearing buddies
- Search Results: 13515
- Search Results: 13511
- Search Results: trailer spindles
- Video: Remove and Reinstall a Trailer Hub Review
- Video: The Low-Down on the Dexter Tang Washer
- Video: Ultimate Overview of the #84 Spindle for 3,500-lb Trailer Axles
- Q&A: Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler Hubs
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Where Does Flat Washer Go
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
on Trailer Spindles
