Replacement Idler Hub Needed for 3500 Pound Axle with 6 on 5-1/2 Bolt Pattern

Updated 06/25/2022 | Published 06/24/2022

Products Featured in This Question

#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles

(177)

$43.92

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased

(1049)

$56.95

Question:

I am looking for a hub w/o brakes to replace a damaged hub. The damaged hub is stamped with “QTP” and “84000”. I’ve not been able to find anything based on those markings, but the TRU77FR spindle has the same bearing dimensions as the hub I am replacing. I need a 6 bolt 5 1/2” pattern hub.

asked by: David F

Expert Reply:

If you are positive that your bearings have the same L68149 (1.378" inner diameter) inner bearing and the L44649 (1.063" inner diameter) outer bearing as the #84 EZ Lube Spindle # TRU77FR, we have what you need! You have a 3,500 pound capacity axle with idler hubs (thanks for the photos!)

For the hubs, I recommend the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. This comes with the same 6 on 5-1/2 pattern that you need. This is for a non-braking axle. I went ahead and attached a demo video that highlights all the parts included.

expert reply by: Bob C