Heating Element Location on a Dometic RV Water Heater

Question

Question:

Where is the electric heating element located on Dometic hot water heater ?

asked by: Lyndon K

0

Expert Reply:

I spoke with Dometic, and they let me know that the electric heating element on the Dometic RV Water Heater # DMC74FR is located behind the circled access panel.

expert reply by: Bryce D

0

Heating Element Location
(click to enlarge)

Answer 1

Hey Gary! The note you're referencing applies when the Correct Track system is installed, which your setup does not have. The MORryde X-Factor Crossmember #MR33WR does include longer wet bolts to account for the added bracket thickness at the…

view full answer...

Answer 2

The only difference between the Progressive Dynamics Inteli-Power RV Converter and Battery Charger #PD9160A and the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C is the charging cycles. The #PD9160A only has one…

view full answer...

Answer 3

There could be a number of causes as to why your Everchill RV Refrigerator w/ Freezer #324-000119 is malfunctioning. I would start by removing the fuse to fully cut the power and waiting a few minutes for the unit to fully reset. If resetting the…

view full answer...

Answer 4

We do indeed offer a replacement heating element for the Dometic WH-6GEA RV water heater which we sell as part #DMC74FR. You'll want to use part #DMC49FR which also includes the needed replacement gasket.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Heating Element Location on a Dometic RV Water Heater

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching