Review of Voyager RV Camera System - Prewired Backup Camera - ASA24YR Video

Hi Lynda, The distance between the camera and monitor shouldn't be more than 60' for your setup so I would check the voltage getting to your camera. A weak signal is usually a sign that the running light circuit isn't providing enough…

Hey Gary, yes the part #ASA33YR would work for you as this is the correct replacement mount for the WiSight which is what you have. I wish we had just the nut by itself but at this time we do not.

Thanks so much for the photo, it was super helpful, and what it shows is that your trailer has the Voyager WiSight Pre-Wire Plate. This will allow you to mount the Voyager WiSight camera system: - Voyager WiSight Wireless RV Backup Camera System…

You are going to be able to use either the original Voyager WiSight or the WiSight 2.0 with the Voyager Prep on your 2022 Winnebago Micro Minnie 1700BH. The prep is simply the electrical connection and the specific mounting pattern for the screws on…

Hi Chris; you do not have to use a Voyager camera even though your trailer is prewired for that system. You can install something like the Furrion Vision S Wireless RV Backup Camera System #FOS05TASF instead. All you have to do is cut off the plug…

We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…

Hi Michael; what you have now is the older Voyager WiSight system. Unfortunately, the 2.0 cameras and parts are not backwards compatible. Since the old system is discontinued, and replacement cameras are no longer available, the only solution is…

Hey Gene! If you truly want a 12V/24V system you're going to be pretty limited. An AC like the #VE27QV or #VE36QV runs on 24V power with 9,000 Btu and is designed with something like a Class B van in mind. Your standard travel trailer is going to…

The Coachmen Apex Ultra Lite is pre-wired for the Voyager WiSight 2.0 Wireless Backup Camera System, part #ASA24YR for a 4.3" monitor or part #ASA37YR for a 7" monitor. This is the only system which will plug into the rear camera port…

Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera #ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor #ASA24YR or 7"…

Since your trailer is not pre-wired to accept a backup camera, the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV #ASA37YR will not work for you. Instead, you're going to want to take a look at the Voyager…

The Voyager WiSight 2.0 you referred to, part WVSXS43 which we offer as part #ASA84YR isn't compatible with the first generation 1.0 system. The good news is that installing the new system will be pretty simple. The new camera can use the same…