Replacement Hardware for Fulton Adapter Kit # F500320

Question

Question:

Hi, Can you tell me the dimensions of the hardware used on Fulton adapter plate F500320? Thanks.

asked by: David S

0

Expert Reply:

We actually have the replacement install hardware for the # F500320 with the part # F0933325S00. The length of the bolt is 1-1/2 inches and the diameter is 5/8 inches.

expert reply by: Jameson C

0

Answer 1

If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part #F500277 for…

view full answer...

Answer 2

The Fulton F2 Swing-Up Trailer Jack with Dual Wheels #F1413060334 may get around better in the conditions you're camping it. It will be hard to find a jack that will move that great on soft surfaces though. The weld-on Fulton Adapter Kit #F500320…

view full answer...

Answer 3

Hi Rob! The F2 series uses a different style plate that you have so you'll either have to replace your weld-on bracket or you can use the bolt-on option #F1413040134 OR you can use the adapter #F500320 to weld the F2 to your trailer.

view full answer...

Answer 4

I reached out to my contact at Fulton and the Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs #F1413040134 is desinged be used with the Fulton Adapter Kit - Weld-On XP Jack Mount to F2 Swing-Up Trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Hardware for Fulton Adapter Kit # F500320

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching