Recommended Mounting Bracket For Fulton F2 Jack

Updated 07/16/2015 | Published 07/15/2015

Products Featured in This Question

Fulton Adapter Kit - Weld-On XP Jack Mount to F2 Swing-Up Trailer Jack for 3" x 4" Frames

(44)

$45.10

Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 3" x 4" Mount

(23)

$46.51

Question:

I have the f2 jack and a 2004 Dorsey boat trailer that has a jack mount that the Fulton will not mount to because the holes do not line up... Is there a faster for this? The mount on the trailer is welded on and does not have a center nut. It has four holes that are not the same as the jack. I can get pictures tomorrow when I get home if that will help. Thanks for your help with this.

asked by: Justin T

Expert Reply:

If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part # F500277 for the F2 swing-up jack with a 3 x 4 mounting system.

We also have a replacement mounting bracket kit for Fulton F2 jacks. Part # F0928059-00 includes 3 inch and 4 inch U-bolts and also has lock washers and nuts. I have attached a photo that shows how this kit can be used on your trailer.

expert reply by: Jeffrey L