Replacement Swivel Jack for 2005 EZ Loader Boat Trailer

Question

Question:

Hi my name is Rob. I have a 2005 ezloader boat trailer I have attached pictures with dimensions. Your phone representatives didn’t seem to know if what i was trying to do. I’m trying to switch my existing jack to an F2 model as my boat boat bent the single wheel current jack when it was parked on asphalt. Your representative says I have a snap on ring jack which I know is wrong because it’s a Weld-On mount with a bolt through the middle. Please help

asked by: Robert W

0

Expert Reply:

Hi Rob! The F2 series uses a different style plate that you have so you'll either have to replace your weld-on bracket or you can use the bolt-on option # F1413040134 OR you can use the adapter # F500320 to weld the F2 to your trailer.

expert reply by: Jon G

0

click to enlarge

Answer 1

I have a few options that may work for you, however, we are not aware of any stainless steel jacks on the market since the discontiuned SeaSense jack. Since you are using this jack with your boat, I recommend looking at the Fulton F2 Swing-Up,…

view full answer...

Answer 2

The Fulton F2 Swing-Up Trailer Jack #F1413040134 (as well as other F2 jacks) has that plastic piece that as you referenced is #9 in the exploded diagram. I reached out to my tech contact at Fulton and unfortunately that is not a replaceable part. You…

view full answer...

Answer 3

I pulled the Fulton F2 Swing-Up Trailer Jack, part #F1413020134, from our warehouse and took a photo and some measurements for you. This jack has dual 7 inch wheels and features a sidewind handle. The jack has an adjustable mount, and is a bolt-on…

view full answer...

Answer 4

No, Sheldon I am sorry we do not. Additionally, I checked with Fulton and they do not offer what is labeled part number 9 on the exploded diagram listed below. If you need to replace this part you will most likely have to purchase a new Fulton F2…

view full answer...

Answer 5

For replacement parts for your F2, we have a pull pin #F500136, handle #F500134, and gear cover #F500135. We no longer have gears or bushings for the F2, You may need an entire new jack.

view full answer...

Answer 6

Yes. The bolt patterns that were referred to in the videos are actually the same and in reality the .06" is a negligible difference that falls within a reasonable margin of error; I believe that on the #F1413050334 measurements were performed…

view full answer...

Answer 7

Hey Rebecca! Information is limited and isn't finalized yet from Trailer Valet since the #TV83FR is still a preorder. However, I was able to find that the full height of the jack when it is retracted is 33" from the wheels to the top. I also…

view full answer...

Replacement Swivel Jack for 2005 EZ Loader Boat Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching