Recommended Replacement Axles to Replace Odd Sized 3,500 lb AL-KO Axles
Updated 02/26/2018 | Published 02/25/2018
Products Featured in This Question
Question:
I have a 2012 enclosed trailer. The paper work says the axles are 3500# dexter axles. The vin says 3500# axles. But I looked at the cheap Id sticker on axle and found out they are alko axles. Anyway, I ordered 10inch 3500# axle brakes from e trailer and when I went to replace noticed that your brakes are 10inch x 2.25. The brakes on this trailer are 10inch x 1.75. Whats going on? I know dexter bought alko but where is the size I need? What can I do convert to 2.25inch without changing axles? Thanks
asked by: John C
Expert Reply:
The Brake and Hub Assemblies will be relative to the spindles on your axles. It is likely that you will need to upgrade your axles to get the brakes and hubs you desire. AL-KO was bought by Dexter years ago and they let go of many of the AL-KO sizes.
We have 10x1.5 inches for a Dexter brake assembly # K23-472-473-00 but not the 1.75 you mentioned. That assembly won't work for your measurements and is only for 3,000 lb axles anyway.
My recommendation for you is the Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs # 35545E-ST-89. This will be a great fit if your leaf spring measurements are 74 inches on center. If they are not, then I recommend you go with the universal fit Timbren Axle-Less Suspension System # A35RS545E. This system will replace your entire axle and suspension system and can be used on tandem applications. You will need a 2 inch square bar (not included) for each assembly to install in the integrated holes. I've attached a video to assist.
Let me know if you have further questions.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: angle
- Search Results: axle
- Search Results: leaf springs
- Search Results: shock kit
- Search Results: leaf spring hanger kit
- Search Results: wheel bearing kit
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Feature Review Loadstar ST185/80D13 Bias Trailer Tire
- Q&A: How To Upgrade Leaf Springs And Add Shocks to a Coachmen Clipper 17FQ
- Q&A: Is There Advantage to 3 Leaf or 4 Leaf Trailer Suspension Leaf Spring
- Q&A: What is the PSI Rating for the Loadstar ST185/80R13 Size Tire
- Q&A: Replacement Axle for AL-KO T35 3,500 Pound Axle with 85 Inch Hub Length
- Q&A: Difference Between 3 and 4 Leaf Spring Stack for 3,500 Pound Axle
- Q&A: Will A 3-Leaf 2,000 lb Spring Offer A Softer Ride Than A 4-Leaf 2,000 lb Spring?
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Loadstar ST185/80D13 Bias Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Search Results: grease
- Video: Comprehensive Review: Dexter Trailer Axle w/ Electric Brakes
- Q&A: Parts Needed To Install 6 on 5-1/2" Brake Hub/Drums on a M1101 Military Trailer