Replacement Coupler For a 2017 Grand Design 2670MK with Loose Latch Mechanism

Question

Question:

Hi, Do you have or do they make a repair kit for the CA-5400-B Ram A-Frame Trailer Coupler - Thumb Latch - 2-5/16 Ball - Black - 14,000 lbs? I have a similar hitch on my 2017 Grand Design 2670MK and it seems loose on the ball and I see no adjustment? Thank you very much

asked by: Jeff W

0

Expert Reply:

I recommend switching to the Demco 50-Degree A-Frame Trailer Coupler # 12660-97SP on your 2017 Grand Design 2670MK. I cannot locate anyone who carries a replacement latch mechanism for the A-Frame Trailer Coupler # CA-5400-B. With the Demco you can easily replace the latch with the Repair Kit # DM6008. It is also auto latching so you will only need to open the latch when disconnecting your trailer.

expert reply by: Bud M

0

Answer 1

So the standard angle for A-frame trailers where the two beams meet is 50 degrees. So while I can't get you a CAD drawing for the coupler part #CA-5400-B if you are trying to design your trailer to have the correct angle for the A-frame you…

view full answer...

Answer 2

You'd just have to physically go out to your trailer and measure the angle. So to do this, you'd need to get a protractor or something similar and place it on the edge of the inside on one side of the trailer frame, and check to see if the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Replacement Coupler For a 2017 Grand Design 2670MK with Loose Latch Mechanism

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching