What Size Hardware for Curt Hitch for 2022 Toyota Highlander

Question

Question:

What size bolts are used to mount trailer hitch for a 2022 Toyota highlander XLE

asked by: Ermelinda G

1

Helpful Expert Reply:

The size of install hardware for the Curt hitch # C99FR that fits your 2022 Toyota Highlander is M12x1.25.

expert reply by: Jameson C

1

Answer 1

It sounds like you are looking for replacement hardware for the Curt Trailer Hitch Receiver #13534 on your 2010 Toyota Highlander. What you need is the Replacement Hardware Kit for Trailer Hitches #RHK. Enter the 13534 item number in the "Hitch…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 9

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 10

Hi Thomas! We definitely have hitch options for your 2021 Toyota Highlander XSE. Our site is a little confusing with how we break that out as not all will fit the XSE model, but most will actually fit whether you have it or not. So with that said,…

view full answer...

Answer 11

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 12

Hello Royer, Thanks for writing in, we’re glad you found us! The correct wiring harness for your 2020 Toyota Highlander XLE without the factory tow package is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C76CR. Even…

view full answer...

What Size Hardware for Curt Hitch for 2022 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching