Mounting Bracket Bolt Hole Pattern For Trailer Valet JXS Trailer Jack # TV34FR

Question

Question:

Mounting Bracket Bolt hole Pattern For Trailer Valet JXS Trailer Jack # TV34FR Do you have specs for the mounting plate on Item # TV34FR? We need to know if the mounting plate will match with our current set of bolt holes. Please and thank you

asked by: Derek

0

Expert Reply:

The mounting bracket for the # TV34FR is actually identical to the bracket on the # TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your reference.

expert reply by: Jesse M

0

TV34FR Bracket
(click to enlarge)

Answer 1

Hi David; for a replacement jack I recommend the Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate #TV64FR. This jack has a 5,000 lb capacity so it will be a lot easier to operate compared tot the Fulton one you have now. You also have…

view full answer...

Answer 2

To help alleviate the back and forth chucking you are experiencing with your 2 inch receiver there are a couple of things I recommend doing. First is to use a cushioned ball mount, the Convert-A-Ball, which is designed to reduce this type of movement…

view full answer...

Answer 3

The #DM5939 is only compatible with the DA91 like the #DM8759131. Unfortunately, there is no option for manual lockout on a DA70 like the ##DM72VR. There are two ways you can keep your brakes from locking up with this brake actuator. The first is to…

view full answer...

Answer 4

The Trailer Valet 5X Swivel Jack, part #STC-V211, has 4 inch long mounting bolts. They're 3/8 inches in diameter as well.

view full answer...

Answer 5

We do not offer a jack that swings up and will work with the I-beam aluminum trailer you said you have but we do have a fixed trailer jack that will work for you. I recommend part #HD50000101. This is a fixed mount square tube jack with a 5,000-lb…

view full answer...

Answer 6

The #DM5939 will only work with Demco actuators. As far as I know the Titan Model 6 doesn't have a spot for a lockout key. This means the only option would be to use free backing brakes or add a solenoid like #T4748800

view full answer...

Answer 7

You shouldn't have any problems with the Trailer Valet not staying vertical. If you have a surge brake actuator, like the Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 that doesn't have a reverse lockout, then the only problem that you…

view full answer...

Answer 8

You absolutely can! To lock the coupler latch of the Demco Hydraulic Brake Actuator #DM8104311 you were looking at to the hitch ball on your vehicle you will need to use the coupler lock #e98887 which gets inserted into the hole on the latch shown in…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Mounting Bracket Bolt Hole Pattern For Trailer Valet JXS Trailer Jack # TV34FR

Products Featured in This Question

Continue Researching