Torque Spec for Bolts on Curt Hitch for 2023 Ford Ranger

Question

Question:

what is the proper torque on the four bolt, on this hitch

asked by: Ray R

0

Expert Reply:

I have attached the written instructions for the # C13417 below. You will find the torque spec for the four M16 bolts under step 3 of the instructions. We are unable to post torque specs on our site since the manufacturer may make a change in the future. If the torque spec changes so will the link to the instructions.

expert reply by: Robin H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey, Stephen! We got just what you need. Since you don't have a tow package, I'm not sure if you have a hitch on your 2025 Ford Ranger so I'll include one just in case. Draw-Tite Max-Frame Trailer Hitch Receiver Part #DT35PR Curt…

view full answer...

Answer 5

Thanks for reaching out, Dennis. Yes, if you purchase the Yakima LockNLoad Platform Roof Tray #Y05044 along with the Crossbar Clamps for Yakima LockNLoad Platform Rack #Y05039, you'll receive all of the hardware needed to assemble the tray and…

view full answer...

Answer 6

Hey Gina, thanks for reaching out. Yes, the Air Lift 1000 Air Helper Springs #AL63WQ will fit your 2025 Nissan Pathfinder Rock Creek. They're designed to install inside the factory rear coil springs and are a great option for helping reduce…

view full answer...

Answer 7

Hey Tom! I personally like the etrailer Hitch #e37ZV because it has a matte black finish that protects the metal better than a standard glossy black finish, but I see you picked up the Draw-Tite #DT35PR which is also a great hitch that I know…

view full answer...

Answer 8

Hi Bryant, It's definitely a smart idea to check and make sure, and I can verify for you that yes, the Curt Trailer Hitch Receiver #C82ZV 100% will fit your 2024 Ford Ranger. I went ahead and confirmed this fit with Curt for you as well.

view full answer...

Answer 9

Hey Mike, the Curt hitch part #C82ZV that fits your 2024 Ford Ranger does fit pretty tight with the spare like you can see in the attached picture but the good news is that there aren't any real issues and it's not difficult to raise or lower…

view full answer...

Answer 10

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 11

The Replacement Mounting Bracket for Yakima SlimShady Roll-Out Awning #8880736 will work with the Yakima LockNLoad and your CVT Awning, but you will need to modify the brackets a little. I'm not quite sure what modifications are required but we…

view full answer...

Answer 12

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Torque Spec for Bolts on Curt Hitch for 2023 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching