Is There a Kodiak 13 Hub and Rotor - 8 on 6-1/2 - 1/2 Bolts - 7,000 lbs Thats Threaded

Updated 06/05/2023 | Published 06/01/2023

Products Featured in This Question

Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs

(226)

$254.75

Dexter 12-1/4" Hub-and-Rotor Assembly - Oil - 8 on 6-1/2 - E-Coat - 1/2" Bolts - 7K

$394.56

Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles

(76)

$86.50

Question:

Conner L. replied to my previous question but I think he misunderstood. I do not want the grease version, I want the threadedinch version for use with Item # KPCAP The KRH1378D is for grease applications. I already use the similar Kodiak rotor for oil bath applications that is threaded for Item # KPCAP. I am trying to replace that rotor that uses the KPCAP Do you carry this rotor with the hub threaded for use with Item # KPCAP

asked by: Bill

Expert Reply:

The Kodiak 13" Hub and Rotor - 8 on 6-1/2 - 1/2" Bolts - 7,000 lbs part # KRH1378D that we offer are not threaded for an oil cap. That said, you can still use them with an oil cap that's pressed on, the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles part # XLPROLUBE2440KIT which also has the seals you need.

The only hub/drum we have for this size axle that is threaded would be the Dexter 12-1/4" Hub-and-Rotor Assembly part # 008-416-91.

expert reply by: Conner L