Suspension Enhancement Recommendation for a 2002 Jeep Wrangler with a 3" Lift

Question

Question:

I have a 2002 Jeep TJ Wrangler that is lifted 3”. Will the Air Lift 1000 Air Helper Springs for Coil Springs - Rear Item # AL60811 work in my vehicle? Thanks for your help.

asked by: Stan E

0

Expert Reply:

The Air Lift 1000 Air Helper Springs for Coil Springs # AL60811 are designed to fit the stock spacing of the coil spring on your 2002 Jeep Wrangler. If that 3" lift increased that height as well then this kit won't fit properly.

As an alternative I recommend checking out the Coil SumoSprings Custom Helper Springs # CSS-1195R which fit in-between the individual coils on your suspension so you don't have to mess with the extra space from a lift kit.

Attached is a review video for you to check out!

expert reply by: Jon G

0

Answer 1

Yes the AirLIft 1000 Air Helper Springs #AL60811 are compatible with your 2005 Jeep Wrangler as long as your lifted coils have the exact same inner diameter as the factory coils. If they're different then we will need to know the inner diameter…

view full answer...

Answer 2

I do have a great option for you, however the Timbren Front or Rear Suspension Enhancement System #TJFTJ that you referenced will not work on your lifted 2000 Jeep Wrangler TJ. I spoke with my contact at Timbren and he said that if you have a true…

view full answer...

Answer 3

I recommend adding Air Lift Lock-N-Lift #AL52440 spacer kit to the AirLift 1000 Air Helper Springs for Coil Springs #AL60811 as it lets you add air springs to your lifted vehicle. It will work with vehicles with up to a 4 inch lift. The diameter of…

view full answer...

Answer 4

When installing the AirLift 1000 Helper Springs #AL60811, you want to install the spacers at the bottom of the air bag. The original spacer that is included in your kit will be used in combination with the Air Lift Universal Air Spring Spacers for…

view full answer...

Answer 5

I have a suspension enhancement system that will work on your 2004 Jeep Wrangler Unlimited with a 2-inch lift, but it will not be the Timbren brand. You will need to use the AirLift 1000 Helper Springs, part #AL80702, for the front and the AirLift…

view full answer...

Answer 6

The Firestone Coil-Rite Rear Axle Air Helper Springs, part # F4157, are intended for use with the stock suspension components in the 2006 Wrangler Unlimited. I called my contact at Firestone and he confirmed that these air springs are not compatible…

view full answer...

Answer 7

Hi Jonathan; that doesn't sound right, do you have a picture you can send? I'm sorry to say that Air Lift does not make a heavier air bag for your 2020 Jeep Gladiator. The #AL60830 is the only option. If you really want to stick with air bags…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Suspension Enhancement Recommendation for a 2002 Jeep Wrangler with a 3" Lift

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching