Air Helper Springs for 2005 Jeep Wrangler Suspension

Question

Question:

Hello, I am looking into part number AL60811. I have 2.5 inch lifted coils on my 2005 Wrangler TJ, will this package work?

asked by: Marc

0

Expert Reply:

Yes the AirLIft 1000 Air Helper Springs # AL60811 are compatible with your 2005 Jeep Wrangler as long as your lifted coils have the exact same inner diameter as the factory coils. If they're different then we will need to know the inner diameter to choose the correct air bags. I've included a video of them being installed in a 2004 Wrangler which will be the same process as yours.

If you're looking for a compressor # AL25592 will allow you to adjust the air pressure in the helper springs from the cab of our Jeep. This compressor also detects when the air pressure in the springs gets below the minimum (Typically 5 psi but can be adjusted to 10 psi) and will automatically restore them back to minimum.

If you're going to be doing the installation yourself you may be interested in a hose cutter # AL10530 to help make cuts straight and prevent leaks in the connections.

expert reply by: Charles S

0

Answer 1

The Air Lift 1000 Air Helper Springs for Coil Springs #AL60811 are designed to fit the stock spacing of the coil spring on your 2002 Jeep Wrangler. If that 3" lift increased that height as well then this kit won't fit properly. As an…

view full answer...

Answer 2

I do have a great option for you, however the Timbren Front or Rear Suspension Enhancement System #TJFTJ that you referenced will not work on your lifted 2000 Jeep Wrangler TJ. I spoke with my contact at Timbren and he said that if you have a true…

view full answer...

Answer 3

I have a suspension enhancement system that will work on your 2004 Jeep Wrangler Unlimited with a 2-inch lift, but it will not be the Timbren brand. You will need to use the AirLift 1000 Helper Springs, part #AL80702, for the front and the AirLift…

view full answer...

Answer 4

When installing the AirLift 1000 Helper Springs #AL60811, you want to install the spacers at the bottom of the air bag. The original spacer that is included in your kit will be used in combination with the Air Lift Universal Air Spring Spacers for…

view full answer...

Answer 5

I recommend adding Air Lift Lock-N-Lift #AL52440 spacer kit to the AirLift 1000 Air Helper Springs for Coil Springs #AL60811 as it lets you add air springs to your lifted vehicle. It will work with vehicles with up to a 4 inch lift. The diameter of…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Air Helper Springs for 2005 Jeep Wrangler Suspension

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching