Availability of Suspension Enhancement System For a 2004 Jeep Wrangler Unlimited With 2 Inch Lift

Question

Question:

I have a 2004 Jeep Wrangler Unlimited with an after market 2 inch suspension lift kit. Will this part still work as designed with a lifted vehicle?

asked by: Eric Y

0

Expert Reply:

I have a suspension enhancement system that will work on your 2004 Jeep Wrangler Unlimited with a 2-inch lift, but it will not be the Timbren brand.

You will need to use the AirLift 1000 Helper Springs, part # AL80702, for the front and the AirLift 1000 Helper Springs, part # AL60811, for the rear. You will also need spacers, part # AL52420, since your Jeep has a 2-inch lift. I am including links to the installation instructions on the AirLift product.

I spoke with my contact at Timbren and he said that the Timbren Suspension Enhancement System, part # TJFTJ, will not work on the front or the rear suspension of your 2004 Jeep Wrangler Unlimited if it is lifted 2 inches. He said the reason is because of the coil spring suspension on the Jeep Wrangler TJ model. The spacer that they offer for lift kits will not work on this application.

expert reply by: Jeff D

0

Answer 1

The Air Lift 1000 Air Helper Springs for Coil Springs #AL60811 are designed to fit the stock spacing of the coil spring on your 2002 Jeep Wrangler. If that 3" lift increased that height as well then this kit won't fit properly. As an…

view full answer...

Answer 2

Yes the AirLIft 1000 Air Helper Springs #AL60811 are compatible with your 2005 Jeep Wrangler as long as your lifted coils have the exact same inner diameter as the factory coils. If they're different then we will need to know the inner diameter…

view full answer...

Answer 3

I do have a great option for you, however the Timbren Front or Rear Suspension Enhancement System #TJFTJ that you referenced will not work on your lifted 2000 Jeep Wrangler TJ. I spoke with my contact at Timbren and he said that if you have a true…

view full answer...

Answer 4

When installing the AirLift 1000 Helper Springs #AL60811, you want to install the spacers at the bottom of the air bag. The original spacer that is included in your kit will be used in combination with the Air Lift Universal Air Spring Spacers for…

view full answer...

Answer 5

I recommend adding Air Lift Lock-N-Lift #AL52440 spacer kit to the AirLift 1000 Air Helper Springs for Coil Springs #AL60811 as it lets you add air springs to your lifted vehicle. It will work with vehicles with up to a 4 inch lift. The diameter of…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Availability of Suspension Enhancement System For a 2004 Jeep Wrangler Unlimited With 2 Inch Lift

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching