Does etrailer Trailer Hitch Receiver Require Drilling to Install on 2019 Volvo XC90

Question

Question:

Does this fit a 2019 Volvo XC90 T6 momentum without having to drill or remove bumper and rear fascia?

asked by: Tommy

0

Expert Reply:

You do not have to remove the bumper, but you do have to remove the rear fascia and drill into the frame of your 2019 Volvo XC90 to install the etrailer Trailer Hitch Receiver # e53KR.

There are no hitches for your XC90 that you can install without either drilling or removing the bumper or rear fascia. You'll just have to drill a pair of 9/16" holes to install the # e53KR, but if you do not want to do any drilling at all - but are okay with removing the rear bumper temporarily - then I recommend instead going with the Curt Trailer Hitch Receiver # C53HR.

expert reply by: Kyle S

0

Answer 1

The Curt Trailer Hitch #C53HR will cut just a bit into the ground clearance on your 2019 Volvo XC90, however it's really only going to sit a small amount below the lowest factory point on the vehicle, which looks to be the muffler. When we…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch #C53HR will fit your 2019 Volvo XC90. The crosstube is hidden for this trailer hitch so the only part that hangs down is the hitch receiver. You won't have any issues with ground clearance because the receiver sits…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Does etrailer Trailer Hitch Receiver Require Drilling to Install on 2019 Volvo XC90

Products Featured in This Question

Continue Researching