Does Curt C53HR Hitch Fit 2019 Volvo XC90

Question

Question:

Does this fit for 2019 XC90? Is ground clearance will be a problem? If so please suggest me a good fit for my car. Thanks

asked by: Girish K

0

Expert Reply:

Yes, the Curt Trailer Hitch # C53HR will fit your 2019 Volvo XC90. The crosstube is hidden for this trailer hitch so the only part that hangs down is the hitch receiver. You won't have any issues with ground clearance because the receiver sits right up against the bumper.

expert reply by: Jon G

0

click to enlarge

Answer 1

The EcoHitch trailer hitch that fits your 2019 Volvo XC60 may interfere with the hands-free liftgate, yes. Most of the time you simply need to kick your foot to the side of the receiver as opposed to the middle and the hands-free liftgate will still…

view full answer...

Answer 2

We have just what you are looking for. EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH95VR which my contact at Ecohitch was able to confirm will fit your 2019 Volvo XC60 T8 Plug In Hybrid. This hitch has a 350lb tongue…

view full answer...

Answer 3

I have a solution for you, we have the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH95VR which my contact at Ecohitch was able to confirm will fit your 2019 Volvo XC60 T8 Plug In Hybrid. As another secure way to…

view full answer...

Answer 4

Yes, we do! The best one is going to be the Curt Hitch item #C53HR. This hitch is custom fit for your 2019 Volvo XC90 and bolts to it with included hardware. This is a class III hitch with a 2" receiver which means it will be compatible with…

view full answer...

Answer 5

I recommend Curt Class III Max Frame Receiver Hitch part #C53HR for the 2019 Volvo XC90. The Curt Class III is a concealed cross tube design so the only portion of the hitch that is visible once installed is the receiver. I recommend the wiring to…

view full answer...

Answer 6

For your 2018 Volvo XC90, I recommend the Curt Trailer Hitch Receiver #C53HR. This Class III hitch is confirmed to fit your vehicle and will provide a 2 inch receiver opening for hitch-mounted accessories or ball mounts for towing. I have attached…

view full answer...

Answer 7

You do not have to remove the bumper, but you do have to remove the rear fascia and drill into the frame of your 2019 Volvo XC90 to install the etrailer Trailer Hitch Receiver #e53KR. There are no hitches for your XC90 that you can install without…

view full answer...

Answer 8

For your 2018 Volvo XC90 the Curt hitch part #C53HR is the correct fit and the one you'd want. The other two part numbers you mentioned are not active, so they are no longer available. For trailer wiring you'd then want the Curt #C56285 which…

view full answer...

Answer 9

I recommend pairing the T-One Vehicle Wiring Harness #118683 with the Draw-Tite Max-Frame Trailer Hitch Receiver #76194 you found for your 2019 Volvo XC90 T6 Inscription. This harness will provide you with a 4-way flat to operate the lights on most…

view full answer...

Answer 10

You can use absolutely any wiring harness with your Curt Hitch #C53HR since they're not tied together in any manner; Stealth hitches just give you an entire package and the big draw of those is that they're designed to only be seen when…

view full answer...

Answer 11

Take a look of the picture I have included showing Curt trailer hitch #C13233 installed on a 2016 Volvo XC90. If you measure from the bottom of the piece pointed out in the picture down about 4-1/2 inches that is approximately where the bottom of the…

view full answer...

Answer 12

Reprogramming will be necessary with the installation of the Towing Kit w/ Ball Mount and Trailer Wiring #SH36FR. Unlike other wiring harnesses, this includes a wiring control module that you will plug your vehicle wiring harness into. Without taking…

view full answer...

Does Curt C53HR Hitch Fit 2019 Volvo XC90

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching