Search: installation videos   >  

I recommend pairing the T-One Vehicle Wiring Harness #118683 with the Draw-Tite Max-Frame Trailer Hitch Receiver #76194 you found for your 2019 Volvo XC90 T6 Inscription. This harness will provide you with a 4-way flat to operate the lights on most…

Since your 2022 Ford Escape doesn't have the tow package and it has LED's you have no other option than to use a wiring harness that requires a power wire ran to the battery. The LED wiring harnesses are to small to splice into and you…

Your 2021 Ford Escape Hybrid does not have a vacuum assisted braking system so you will be able to skip the vacuum line step when installing the Roadmaster InvisiBrake Supplemental Braking System #RM-8700.

We haven't made one because we haven't had a 2023 Volvo XC90 in the shop. The Curt Trailer Hitch item #C13233 is the same hitch as the etrailer item #e53KR it just has a different finish. I have linked an installation video we did awhile back…

The etrailer #e53KR Class III hitch fits all models of the 2021 Volvo XC90, including the Inscription Recharge. The install procedure shown in the linked video for the 2019 XC90 would be the same as the 2021. If you'll be using the hitch for…

You'd just have to physically go out to your trailer and measure the angle. So to do this, you'd need to get a protractor or something similar and place it on the edge of the inside on one side of the trailer frame, and check to see if the…

According to my research you can tow up to 4,500 lbs with your 2016 Ford Flex if you have the Class III Trailer Towing Package (which looks like it includes a 4/7 Way wiring harness, hitch receiver, trailer sway controller, and an engine oil cooler).…

If your 2011 Ford Flex SEL did not come with a factory installed 7-Way trailer connector then you can either use the T-connector without the converter, #118472, or you could use one with a powered converter, #C56343. Either harness will work. The…

We currently have three versions of the Demco 32 degree A-Frame coupler but none of them are zinc plated. We have the part #DM15633-97 which is primered, the part #DM15633-81 which is powder coated black, and we have the part #DM15633-52 which is…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The Demco 32-Degree A-Frame Trailer Coupler part #DM15633-81 must be welded per the manufacturer. I'm sure you could drill holes and attach the coupler that way but we can't recommend this. The weight capacity would be severely compromised if…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…