Will Installing Curt Trailer Hitch Affect Ground Clearance on 2019 Volvo XC90
Updated 08/06/2020 | Published 11/06/2019 >
Question:
I am planning on adding the Curt C53HR hitch to my 2019 Volvo XC90 and wondering if it will cut into my ground clearance and by how much? Thanks.
asked by: Tim
Expert Reply:
The Curt Trailer Hitch # C53HR will cut just a bit into the ground clearance on your 2019 Volvo XC90, however it's really only going to sit a small amount below the lowest factory point on the vehicle, which looks to be the muffler. When we installed this hitch on the 2018 Volvo XC90 we measured a distance of 13-3/4" from the ground to the top of the 2" receiver. You can take this measurement up from the ground with your Volvo parked on a level surface to get a good idea of where the receiver will sit when installed.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Video: Curt Class III Trailer Hitch Step-By-Step Installation - 2017 Volvo XC90
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: How to Install: Curt Trailer Hitch Receiver on your 2020 Volvo XC90
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Video: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Installation 2020 Volvo X
- Q&A: Does etrailer Trailer Hitch Receiver Require Drilling to Install on 2019 Volvo XC90
- Shop: Curt Rubber Tube Cover - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Installing the Curt Trailer Hitch Receiver on a 2016 Volvo XC90
- Shop: Oris Trailer Hitch with Detachable Hitch Receiver - Custom Fit - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Setting up the Adapter 4-Pole to 5-Pole Trailer Wiring Adapter on your 2020 Toyota Corolla
- Video: Installing the Curt Trailer Connector Adapter on your 2010 Acura MDX
- Video: Adapter 4-Pole to 5-Pole Trailer Wiring Adapter Spec Review
- Q&A: Does Curt C53HR Hitch Fit 2019 Volvo XC90
- Q&A: Stealth Hitch And Towing Kit For 2024 Volvo XC90
- Q&A: Does the Oris AK41 Hitch Block the Foot Sensor on a 2021 Volvo XC90?
- Q&A: Is There Trunk Mounted Bike Rack that Can be Used with 50 lb Bike for 2018 Volvo XC60
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Best Trailer Hitch For 2024 Volvo XC90 B5 For Carrying Two Bikes With Thule EasyFold XT
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Hitches are Made in the USA
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop


Chris
7/29/2020
I am purchasing this hitch from you, I watched the video for the 2018 XC90 install - However I cannot find a video on your site for the 2019 XC90 install. Would you be able to forward me the video for the 2019 install? And any other useful information you have so I can properly conduct the home install for this product? The video would be very helpful but cant find it on your site. Additionally what torque wrench etc would I need to purchase. And if I'm only hauling bikes - do i really need to worry about that? Thanks!