Replacement Hardware Kit For Curt Trailer Hitch Receiver # C13092 On a 1995 Nissan D21 Pickup

Question

Question:

Do you sell the hardware for a curt hotch for a 1995 d21? Thank yoh

asked by: Richard P

0

Expert Reply:

You will need to order the Replacement Hardware Kit # RHK to get the hardware for the Curt Trailer Hitch Receiver # C13092 which fits your 1995 Nissan D21 pickup. Be sure to enter this hitch number when you order the hardware kit to ensure you get the correct parts for your receiver.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hey Mike, thanks for the information! The best weight distribution system for your 7,000 lbs Big Tex 70DM car hauler is going to be the Equal-i-zer item #EQ37100ET. This system works with tongue weights between 600 lbs - 1,000 lbs. That's going…

view full answer...

Answer 4

Yes, the Curt Trailer Hitch Receiver #C73DR will fit your 2022 Lexus RX 350 as long as it isn't the F Sport model. If that's what you have then you'll need the Draw-Tite Hitch #75540 instead. If you're planning on using this for a…

view full answer...

Answer 5

We've got just the hitch for you, Andrew! Hitch part #DT58GR is the custom fit hitch for your 2022 Lexus RX 350 F Sport. A few things to note about the install, there is no drilling required, however minor heat shield modification may be…

view full answer...

Answer 6

Hey Ernie, so I would have to recommend you stick with the install instructions if you can when you install the #75540 since that is how the hitch was tested and designed for. Now with that said if it was me and I found a way to use spacers to not…

view full answer...

Answer 7

I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the #PTW80157. It looks like one bearing is stamped with…

view full answer...

Answer 8

With a 4-way flat trailer wiring harness like the #HM43505 which is a fit for your 1997 Nissan Pickup the only functions you get are the turn signals/stop lights and running light circuit. If there's an additional circuit needed like maybe a 12…

view full answer...

Answer 9

The Curt hitch #C13092 does fit your 1997 Nissan truck and does require drilling to install. For more info on the install check out the install instructions link I attached.

view full answer...

Replacement Hardware Kit For Curt Trailer Hitch Receiver # C13092 On a 1995 Nissan D21 Pickup

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching