Recommended Suspension Enhancement for a 2016 Ram 3500 w/ Air Ride Suspension

Question

Question:

Will #T94VR work on a 2016 Ram 3500 DRW with rear air ride suspension. Hauling a truck camper

asked by: Douglas S

1

Helpful Expert Reply:

Yes, it will. The Timbren Suspension Enhancement System item # T94VR is compatible with your 2016 Ram 3500's air ride suspension. These springs fit all 2WD and 4WD Ram 3500 models including the cab and chassis.

I have linked the installation instructions below.

expert reply by: Jerred H

1

Answer 1

Hey Bryce! StableLoads are not compatible with the factory air ride system on your 2022 Ram 3500. Since you’ve already upgraded the shocks, what you're experiencing is more about how the truck is supporting and controlling that 3,000 lb camper.…

view full answer...

Answer 2

Air springs are definitely the right way to go for your 2019 Ram 3500 since they can be adjusted to accommodate a wide range of loads. For your application I recommend going with the Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 since they…

view full answer...

Answer 3

Hey Mick! Thank you for providing that information. Since you're going offroad with the truck camper I recommend the Timbren Suspension Enhancement System #T94VR. This is designed for constant loads like a slide-in camper and has a really high…

view full answer...

Answer 4

Based on my research, the factory air ride suspension for the 2017 Ram 3500 will essentially replace the coil spring suspension on the vehicle. This will provide some nice features and the decision is ultimately up to you, but I do recommend going…

view full answer...

Answer 5

Hello Brennan. The only real difference between the different sumo spring options is the weight capacity or stiffness of the springs. Since you will have a truck bed camper on your 2022 Ram 2500, I recommend going with the 5,000 lb capacity…

view full answer...

Answer 6

Since the SumoSprings Rebel Helper Springs and TorkLift StableLoad Kit install in different locations on your 2022 Ram 3500 you can definitely use both at the same time to help out with any sag you might experience under a load. I recommend using the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

view full answer...

Recommended Suspension Enhancement for a 2016 Ram 3500 w/ Air Ride Suspension

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching