Adapter Plate to Connect a MORryde Pin Box to a Pullrite SuperGlide 5th Wheel Hitch

Question

Question:

Is the MORryde cushioned pin box compatible with the Pullrite Superlite 2600 single point attachment hitch. ‘22 Grand Design 303RLS.

asked by: Frank

0

Expert Reply:

Yes, all you're going to need for your MORryde Pin Box to adapt to your Pullrite hitch is the MORryde Pin Box Adapter for PullRite SuperGlide Hitch # MR57ZR.

This adapter plate easily bolts into place on your MORryde Pin Box and well allow you to use your Pullrite SuperGide hitch.

expert reply by: Bryce D

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Answer 5

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 6

Hey Dave, welcome back! The only front hitch that fits the diesel models is the EcoHitch Hidden Front Mount Trailer Hitch #EH37FR. Installation will require some trimming. You can see what it's like in the installation video linked further down…

view full answer...

Answer 7

Hey Bryce! StableLoads are not compatible with the factory air ride system on your 2022 Ram 3500. Since you’ve already upgraded the shocks, what you're experiencing is more about how the truck is supporting and controlling that 3,000 lb camper.…

view full answer...

Answer 8

Hey Dean, this is a great question but the weight of the Vitrifrigo DW180 RV Refrigerator #VT39RR is 123 lbs and it actually can be used on AC or DC power so if you needed to run it straight from a 12 volt power source or a 120 power source it can…

view full answer...

Answer 9

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 10

To determine if the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD #MR84VR will fit your trailer you'll need to first determine your trailer's bolt pattern. There will typically be a sticker (pictured…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

view full answer...

Adapter Plate to Connect a MORryde Pin Box to a Pullrite SuperGlide 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching