How To Determine if Dexter 12x2 Electric Brake Assembly # 23-106-09 Will Fit 1982 Silver Streak RV

Updated 09/30/2013 | Published 09/29/2013

Products Featured in This Question

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs

(18)

$156.14

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs

(20)

$169.39

Question:

I see your note about a 1981 Silver Streak, but will these fit a 1982? My dad is broke down in Corpus, TX and standard parts do not work.

asked by: Owen H

Expert Reply:

The same answer would apply. The brake assembly # 23-106-09 is designed to fit a Hayes/AL-KO or Dexter axle with either the 4-bolt or 5-bolt mounting flange. These are 12 x 2 inch brakes. To measure the drum you will measure the inside diameter. It should be 12 inches. Then measure either the width of the old pad or the width of the surface it would contact on the inside of the drum. That should be 2 inches.

These brakes are designed for 6,000 pound axles but could also be used on a 5,200 pound axle as long as the drum is the right size and the mounting pattern matches. The matching left side brake assembly will be the Dexter 12 x 2 Inch LH Electric Brake Assembly, part # 23-105-09.

You mentioned standard parts will not work. If you happen to know the axle manufacturer or can tell me anything else about the axle and the brake mounting flanges, that would help.

expert reply by: Michael H