How to Determine if 6k Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange Will Fit Flange

Updated 07/17/2023 | Published 07/16/2023

Products Featured in This Question

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs

(18)

$155.10

Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs

(16)

$134.96

Question:

Hello, How do I know if item 23-105-09 will fit my backing plate? This is an old axle of unknown manufacture. It’s so old it has the Warner electromagnetic brakes on it. Thank you!

asked by: David

Expert Reply:

You'll need to do some quick measuring of your backing plate/brake flange to see if you can use the 6,000 lb Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand # 23-105-09.

I have added photos below that I hope will help. One is of a standard 5-bolt brake flange where the bolts are 2-1/8" apart except for the bottom which are 3" apart. The other photo is of is the brake assembly which shows the dimensions of the AL-KO/Hayes 4-bolt flange, where the holes are 3-1/8", 2-1/2" and 3-3/8" apart.

Hopefully this helps you determine if you can use the # 23-105-09, and if you can and also need the right hand side that part number is # 23-106-09.

expert reply by: Kyle S