Replacement 12 x 2 Inch Electric Brake Assemblies for K-H KAE-96002-02
Updated 02/05/2026 | Published 08/03/2021
Question:
I am looking to replace my trailer brakes on an old trailer. The numbers on it are K-H KAE-96002-02. It has 4 bolt mounting and is a 12x2 hub. I believe the Dexter - Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12inch - Right Hand - 6,000 lbs will work but want to run it by someone.
asked by: Allen S
Expert Reply:
It looks like the studs in your brake assembly are closer together (center to center) at the bottom. If the center to center bolt spacing matches the photo I've provided, then the # 23-105-09 you'd looked at would be the correct replacement brake assembly that's compatible with a 12 x 2 inch (inside depth and diameter) brake drum.
I've linked to a product video that you might find helpful.
(click to enlarge)
Scott
2/5/2026
Yes it would probably fit but is the going to hit the brakes and bottom out before the axle nut gets tight.
Product Page this Question was Asked From
Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Search Results: hayes axle
- Search Results: alko hayes
- Search Results: electric trailer brakes
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Search Results: drop axle
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Mounting Hole Pattern for Dexter 12 x 2 Electric Drum Brake 23-105-09
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Video: Hands-On with the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange
- Q&A: How to Determine if 6k Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange Will Fit Flange
- Q&A: Replacement 12" Brakes for a Kelsey Hayes Axles w/a 4 Bolt Mounting Flange
- Shop: RV Interior Lighting
- Search Results: stillwell
- Search Results: clevis hook
- Q&A: Will 12" Dexter Electric Brakes w/4 and 5 Bolt Pattern # 23-105-106-09 Fit in Place of Hayes Brakes
- Video: All About the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange
- Shop: Trailer Wiring
- Shop: Gooseneck Hitch
- Video: Mount: B and W Companion Sliding 5th Wheel Hitch w/ Turnoverball for Ram on a 2014 Ram 3500
- Q&A: Troubleshooting Trailer Tire Wear on the Outside Edge of the Tire
- Video: Review of the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange
- Article: How to Charge a Dump Trailer Battery
- Shop: Brake Controller
- Q&A: Replacement 12" X 2" 6,000LB Trailer Brakes For Coachmen Camper With 23-105-00 and 23-106-00 Brakes
- Video: Comprehensive Review: Replacement Brake Wire Retaining Clip for Electric Trailer Brakes
Jlg
9/7/2024
Hey Mike. I am looking for electric brakes for my cattle trailer and I’m not having any luck. I saw this post and noticed the old brake assembly was the same as mine. I ordered the 023-106- 09 just like the one you suggested. It will not work. I know if the customer ordered this one he also had the same issues. I was wondering if you found something else comparable for this customer.