Recommended Trailer Hitch Receiver and 4-Way Wiring Harness For a 2016 Lexus RX 350

Question

Question:

What hitch would work with a lexus rx350 2016 model...

asked by: Ted H

0

Expert Reply:

I recommend installing the etrailer Trailer Hitch Receiver # e94AR on your 2016 Lexus RX 350. This receiver has a matte black finish giving it more of a factory appearance. It also has a hidden cross tube so all you will see is the 2" receiver opening and the chain hook loops.

The T-One Vehicle Wiring Harness # 118255 will allow you to plug into the factory harness so you have a functioning 4-way to connect on small trailers. It can also be used for Auxiliary Lights # C53201 if you have a hitch mounted accessory which impairs the view of your tail lights. The Mounting Brackets # 18140 & # BK4F will allow you to secure the 4-way to your receiver without drilling.

expert reply by: Bud M

0

Answer 1

You should not have to trim anything on your 2016 Lexus RX350 to install etrailer trailer hitch #e94AR. Ther is also no drilling required for installation. If Your Lexus is equipped with the lateral performance damper, the damper will need to be…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Trailer Hitch Receiver and 4-Way Wiring Harness For a 2016 Lexus RX 350

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching