How To Find Correct Replacement Landing Gear for Keystone Sprinter 29RL

Updated 02/20/2023 | Published 02/18/2023

Products Featured in This Question

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

(746)

$245.87

Lippert Standard 5th-Wheel Landing Gear Motor w/ IP Rated Switch and Harness

(3)

$397.61

Question:

I have a 2021 Keystone Sprinter 29RL. Unfortunately dealer ped trailer while moving it with a forklift and impact bent one leg of my landing gear. Will this kit work or is there one you would recommend? Higher lbs recommendations? Wishing dealer would own up to ping it, but landing gear wouldnt function after picking it up from them, tired of battling them and just want to fix it. Sorry for the novel, thank you for the help.

asked by: Allen D

Expert Reply:

The Landing Gear Set part # RVLG-8HDL is a great replacement option or upgrade for most trailers. That said, in order to confirm fit, you'll need to measure the distance between the weld stops on the existing legs. If they measure 15-1/2" between them inside to inside or 17-1/2" between them outside to outside then these landing gear legs will be a direct fit replacement.

If you'll be taking the time to replace the landing gear legs, you might consider adding an electric motor for faster, easier operation. For this, I recommend the Lippert Standard 5th-Wheel Landing Gear Motor w/ IP Rated Switch and Harness part # LC217884.

In regards to capacity, the 8,000 lb rating of this kit will be at or near the top so there's really no need to go any higher, especially for this trailer as the jacks only really need to be rated for pin weight more or less.

expert reply by: Conner L