MORryde X-Brace 5th Wheel Landing Gear Stabilizer

Part Number: MR72AR

291 Reviews | 15 Questions

In Stock

$184.99

1 used item available at $152.95

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

morryde camper jacks landing gear manual jack

morryde camper jacks 5th wheel bolt-on x-brace landing gear stabilizer

morryde camper jacks landing gear bolt-on mr72ar

morryde camper jacks manual jack bolt-on mr72ar

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2018 jayco eagle fifth wheel camper jacks morryde manual jack bolt-on mr72ar

2018 jayco eagle fifth wheel camper jacks morryde 5th landing gear on a vehicle

2018 jayco eagle fifth wheel camper jacks morryde landing gear manual jack mr72ar

2018 jayco eagle fifth wheel camper jacks morryde 5th manual jack x-brace landing gear stabilizer

2018 jayco eagle fifth wheel camper jacks morryde 5th bolt-on on a vehicle

2018 jayco eagle fifth wheel camper jacks morryde 5th bolt-on x-brace landing gear stabilizer

2018 jayco eagle fifth wheel camper jacks morryde landing gear bolt-on mr72ar

2018 jayco eagle fifth wheel camper jacks morryde landing gear manual jack on a vehicle

Show All (8) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

MORryde X-Brace 5th Wheel Landing Gear Stabilizer customer photo

Show All (21) Customer Images

Show Fewer Customer Images

Videos

Set up: MORryde 5th Wheel Cross Brace Landing Gear Stabilizer on a 2018 Jayco Eagle Fifth Wheel

Rock-Solid Stability in Seconds – MORryde Shows Us How

Show All (2) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Cross brace bars permanently attach to your fifth wheel's landing gear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landing gear. Hand-tighten tubes to increase stability. 1-800-940-8924 to order MORryde camper jacks part number MR72AR or order online at etrailer.com. Free expert support on all MORryde products. Great prices and Fastest Shipping for MORryde X-Brace 5th Wheel Landing Gear Stabilizer. Camper Jacks reviews from real customers.

MORryde Camper Jacks - MR72AR

Features:

Cross braces permanently attach to your 5th wheel's landing gear to reduce your trailer's movement while parked
Braces extend and retract with landing gear for easy setup and storage
Tubes adjust by hand to maximize stability
- Pin flags lock tubes in position
Black powder coat finish resists corrosion
Easy, bolt-on installation with included hardware - no drilling required

Specs:

Application: square, electric landing gear legs
Tube dimensions:
- Fully retracted: 54" long x 1" diameter
- Fully extended: 80" long x 1" diameter
Weight: 22 lbs
1-Year limited warranty

Note: This stabilizer will not work with round, hydraulic landing gear legs.

SP54-180 MORryde 5th Wheel Stabilizer X-Brace Stabilizer

Installation Details MR72AR Installation instructions

Customer Satisfaction Score:

94% were satisfied with this product

6% of customers were not satisfied

Arrived Damaged
Wrong item was ordered
Defective

6% of customers were not satisfied

Arrived Damaged
Wrong item was ordered
Defective

4.5

282 reviews

5 Stars		(100)
4 Stars		(24)
3 Stars		(5)
2 Stars		(6)
1 Star		(5)

by: Michael 03/06/2021

by: John 01/05/2022

by: Raymond 09/10/2021

by: David 02/27/2021

by: Bob01/31/2023

by: Roland 07/23/2022

by: Colt 12/22/2021

by: Ginger 01/03/2022

by: Rob12/14/2022

by: Michael06/28/2023

by: Richard 08/21/2021

by: Wayne 07/14/2023

by: Greg 09/29/2022

by: Timothy 07/30/2024

by: William 08/22/2021

by: Devin 11/11/2021

by: Mark 04/09/2023

by: Mark 02/21/2025

by: christopher 10/13/2024

by: Gavin 07/04/2023

by: Gregory 11/01/2024

by: James10/22/2025

by: Richard 12/10/2021

by: Thomas 11/15/2021

by: John 10/06/2021

282

Show More Reviews

See what our Experts say about this MORryde Camper Jacks

Do you have a question about this Camper Jack?

Recommended Replacement Landing Gear for 2019 Genesis Supreme Vortex 2815V
Thank you for providing that information. Based on that, I recommend the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. These dual electric jacks are a universal fit so the mounting brackets will need to be welded to the frame of your 2019 Genesis Supreme Vortex 2815V . Welding should be performed by a qualified professional welder. They feature a combined weight capacity of 12,000 lbs and a 38" lift. The rate of travel is 15 seconds/inch and they come with a 3-year warranty....
view full answer...
Will the MORryde 5th Wheel Cross Brace Landing Gear Stabilizers Work W/ Frame Mounted Landing Gears
Hey Corbin, yes I don't see why not. Checking the instructions, it looks like as long as you can install the mounting brackets you can use the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR with your frame mounted landing gear.
view full answer...
Will MORryde X-Brace Stabilizers Fit A 5th Wheel Trailer With Round Tube Jacks
Hey Shane, Can you email me some pictures of your setup so I can see what you're working with? I'll send you a separate email to reply to. Update: Got your picture, unfortunately the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR doesn't currently offer a mounting bracket to connect to your round leveling jacks. JT's Strong Arm Stabilizers have an adapter lug # LC314592 available that can mount to the footplate instead of the jack tube, allowing you to mount their...
view full answer...
Stabilizers For Electric Automatic Landing Gear
While we do have an option for you, MORryde has told us the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR should not be used with auto leveling landing gear. So what you would need instead, that is confirmed to work with your electric auto leveling landing gear, is an option from Lippert, the JT's Strong Arm Jack Stabilizer Kit . The only thing you need to know for the right kit is the distance between the landing gear legs; you will also need an adapter for your electric...
view full answer...
Options for Stabilizing Fifth Wheel Automatic Leveling Jacks
The JT's Strong Arm Stabilizer Kit # LC191023 paired with the either # LC314597 to adapt it to electric jacks, or # LC314592 to adapt it to hydraulic jacks, can be used with auto leveling jacks without issue. I spoke to MORryde and the # MR72AR said that this should not be used with hydraulic auto leveling jacks, unfortunately. That being said, they did say this will work with most electric auto leveling systems that use square jacks.. It should be noted, however, that the # LC191023...
view full answer...
Recommended 5th Wheel Landing Gear Stabilizers For Round Tube Landing Gear Legs
Hi Brian, The MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR mounting brackets require a square tube design in order to install so these braces won't be a fit for your round tube landing gears. Instead you'll need the JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear # LC191023 or # LC191024 (Less Than 58" Between Landing Gear). In the video attached below Brad installed this system on a round tube system by using adapters # LC314592...
view full answer...
Landing Gear Stabilizer Recommendations for 2020 Sabre Fifth Wheel 36BHQ
I recommend the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer, # MR72AR that permanently attaches to your fifth wheel's landing gear reducing movement while parked. After installation, the braces will extend and retract with your landing gear, simply hand-tighten the tubes to increase stability. For the rear of the 5th wheel, I suggest the Valterra Folding Manual Stabilizer for Trailers and RVs, # 020106. This fits RV's with 14" to 28" of frame-to-ground clearance. You can also...
view full answer...
Does MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR Work on 5th Wheel Trailers
The MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR that you referenced does work on fifth wheel trailer frames. We even had the chance to install them on a fifth wheel which you can see in the attached install video.
view full answer...
Do You Have To Remove the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer During Travel
The MORryde 5th Wheel Cross Brace Landing Gear Stabilizer part # MR72AR can be left installed on the landing gear legs while in transit. You can retract the landing gear legs with the braces in place as well you just need to make sure they are loose so they don't bind. There won't be an issue either if you need to use leveling blocks with the braces.
view full answer...
Can MORryde 5th Wheel Cross Brace Landing Gear Stabilizer Work with SnapPads
SnapPads would not interfere with the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR at all so the two would easily work well together.
view full answer...
Best 5th Wheel Cross Brace Landing Gear Stabilizer
Yes, the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer item # MR72AR is universal and will fit your 2022 Grand Design Reflection 150 295rl so long as your landing gear is between 58"-80" wide.
view full answer...
MORryde 5th Wheel Cross Braces For Square Electric Landing Gear Legs
It sounds like you're looking for the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR. These bars will permanently attach to your 5th wheels landing gear legs to reduce movement while parked, and when the landing gear is retracted, these cross braces retract with the legs. I have also attached a review video on this product for you to check out.
view full answer...
What is Max Length of MORryde 5th Wheel Cross Brace
When the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR is fully extended it measures 80 inches so it would easily handle your 68 inch length requirement.
view full answer...
Are The MORryde 5th Wheel Cross Brace Landing Gear Stabilizers A Fit For A 2011 Keystone Montana
Yes, the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR is a universal-fit product that's going to simply clamp onto the outer tube of your Montana's landing gears for the top of the braces and have another bracket that will attach at the bottom where your landing gear's footpad meets the inner tube of the landing gear. I've attached a short video below where Conner will walk you through the installation process and go over why these cross braces will help stabilize your...
view full answer...
Landing Gear Fitment on 2021 Forest River XLR Nitro 35141 5th Wheel Toy Hauler
Since the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR fully extends up to 80" and the distance between your landing gear jacks is 81" I don't see this kit fitting your application unfortunately. Instead you might consider the MORryde Hitch Mounted Stabilizer for 2" Trailer Hitches # MR22AR or the JT's Strong Arm Jack Stabilizer Kit # LC191023 which doesn't have to stretch from landing jack leg to landing jack leg.
view full answer...

Do you have a question about this Camper Jack?

EtrailerWeb.DataContracts.Swiper.SwiperImageOnlyElement EtrailerWeb.DataContracts.Swiper.SwiperImageOnlyElement

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$152.95

Add to Cart

Secure Checkout

Info for this part was:

Edited by:

Lindsey S

Expert Research:

Jameson C

Video Edited:

Jacob T

Video Edited:

Dustin K

Updated by:

Wilson B

Updated by:

Noah M

Updated by:

Konnor K

Test Fit:

Conner L

Test Fit:

David F

Written by:

Mike S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.