Availability of a 5,200LB Straight Trailer Axle With Spring Seats Located 75" On Center
Published 01/22/2023
Products Featured in This Question
Question:
I am trying to rebuild my venture VRT-7200 which has dual 3600# axles. I want to upgrade those to a 5200+ rating. When I measure the spring centers on the existing axles.. I am at 75in. I only see a 74in option on your website. I would assume that is NOT a solution... looking for options
asked by: Shawn S
Expert Reply:
You may be able to still use an axle like the 89" Axle # e75SR on your Venture VRT-7200 trailer. While the Spring Seats # TRSS300 are currently welded at 74" on center they are able to be cut off and new seats welded on in the correct position. For this particular axle the minimum overhang is 12-3/4" and the maximum is 19". This will allow the spring seats to be welded on between 76-1/4" to 70" on center.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Video: Checking Out the Trailer Axle w/ Electric Brakes
- Article: Trailer Wiring Diagrams
- Search Results: 5200lb axle
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Shop: Electric Trailer Brake Assembly - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Search Results: trailer axles
- Shop: CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Q&A: Upgrading Dexter 8-222 Trailer Hubs
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs
- Q&A: Dexter Replacement 3,500LB Axle With 89 Hub Face, 70 Spring Center and 4 Drop Spindle
- Q&A: Replacement Axles and Brakes for 2007 Venture VATB
- Q&A: Replacement 3,500 lbs Drop Axle for a 2006 Pace Journey Trailer
- Search Results: trailer brakes
- Q&A: Recommended Bearing Kit for a 5,200 Pound Lippert LC152 Axle
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: Valterra ABS Solvent Cement - 1/4 Pint
- Video: Review of the Electric Trailer Brake Assembly
- Q&A: Full Axle vs Spindle Replacement for 2012 Forest River Stealth Toy Hauler