Is There a 3,500 Lb Trailer Axle with 72" Hub Face Length
Updated 01/19/2023 | Published 01/18/2023
Products Featured in This Question
Question:
I’m looking for a 3500lb trailer axle with electric brakes. Hub to hub needs to be between 70”-74”. I can move the leaf springs if needed. I can’t seem to find this combo on your site. Is that something you guys offer? It’s for a custom built trailer so I don’t have part numbers or anything.
asked by: Matt R
Expert Reply:
I do have an option for you but all of our axles within the hub face range you to specified have a weight capacity under 3,500 lbs. The Trailer Axle with Idler Hubs part # e78GR for example has a hub face to hub face measurement of 72" and has a 2,000 lb weight capacity. It does not have brake flanges installed so if you wish to add brakes you'd need to weld these on yourself using the Brake Mounting Flange part # 4-34. You could then complete your setup using the Electric Trailer Brake Kit part # AKEBRK-2 and Easy Grease Trailer Hub and Drum Assembly part # AKHD-545-2-EZ-2K.
Product Page this Question was Asked From
Trailer Idler Axle Beam with Easy Grease Spindles - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Brake Controller
- Video: Best 2016 Land Rover Evoque Hitch Options
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Video: Curt Brake Controller C51322 Review
- Shop: Curt Venturer NEXT Trailer Brake Controller w/ Custom Harness - Up to 3 Axles - Time Delayed
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Article: How to Measure a Trailer Axle
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Replacement Hubs for 2000 Coleman Sedona
- Q&A: Recommended Suspension Setup For A Lightweight Offroad Trailer
- Q&A: Options For Replacing The Axle On A 5' x 8' Trailer
- Q&A: Is there a Brake Mounting Flange for a Square 3500 Pound Trailer Axle
- Q&A: Recommended Replacement Axle To Fit 205/75R15 Tires On 5x8 Ultra-Tow Aluminum Trailer
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
on Trailer Axles
