Replacement Hubs for 2000 Coleman Sedona
Published 09/08/2021
Products Featured in This Question
Question:
I found a number on the other hub that I can read. It looks like both inside and outside are L44649. Inside and Outside bearings appear to be the same size. I'm looking for a complete hub and bearing replacement. I am also thinking about upgrading and adding brakes. What size kits would you recommend?
asked by: Michael C
Expert Reply:
Sometimes the numbers wear off of the bearings in trailer hubs but what you can do instead is use the diameter of the spindle where the bearings ride to determine what would be correct replacement.
Use this picture as a guide and let me know what you have and I'll help:
https://images.etrailer.com/static/images/pics/q/u/qu87803_800.jpg
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Search Results: trailer lights
- Search Results: bearing cap
- Search Results: bt8 spindles
- Search Results: dexter bearing
- Search Results: weld on safety chain loop
- Search Results: trailer safety chains
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: safety chain
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: 48" Long Safety Chain with 3/8" S-Hook with Latch - 3,000 lbs - Qty 1
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Recommended Replacement for Dexter 8-259 Idler Hub
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Q&A: Resetting the Pin on the LCI Leveling System Remote Control
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Brake Controller
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Curt Brake Controller C51322 Review
- Video: Best 2016 Land Rover Evoque Hitch Options
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Article: How to Measure a Trailer Axle
- Q&A: How to Determine if 2,000 lb Electric Trailer Brakes Will Fit
- Q&A: Troubleshooting Pre-Mature Wear on 7" Brake Assemblies and Magnets
Michael C.
9/8/2021
I found a number on the other hub that I can read. It looks like both inside and outside are L44649. Inside and Outside bearings appear to be the same size. I'm looking for a complete hub and bearing replacement. I am also thinking about upgrading and adding brakes. What size kits would you recommend?