Best Way to Pack Trailer Bearings with EZ Lube Spindles
Published 01/11/2023
Products Featured in This Question
Question:
What is the correct way to relube an ezlube axle I had them all replaced along with the brakes 2 years ago. I havent used the trailer a lot but am heading off on a 6000 mile trip.
asked by: Ray
Expert Reply:
Greasing by hand is what we recommend instead of using the EZ lube fitting to pump in grease. Unfortunately its' too easy to overfill hubs with grease using the EZ lube fittings which then blows out the seal. LMX Red grease like the part # L11390 is a really great option that's heavy duty and waterproof. I attached a vid on packing hub bearings for you to check out as well.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Search Results: trailer lights
- Article: Overview of Lubricating Grease
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Search Results: grease
- Shop: LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Rectangle - Red Lens - Passenger
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Q&A: Blue Ox SwayPro VS TrackPro Weight Distribution System
- Q&A: Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Greasing E-Z Lube Spindle and Determining Correct Replacement Hub and Drum Assembly
- Q&A: What Type of Grease to Use for Dexter Axle Hub Assembly
- Q&A: Is Extra Grease Needed When Installing the Trailer Hub and Drum Assembly for 3.5K Axles
- Q&A: What Kind Of Grease Does The Easy Grease Trailer Hub and Drum Assembly AKHD-545-35-EZ-K Use?
- Q&A: Does Grease Seal of Easy Grease Trailer Hub and Drum Prevent Grease from Getting on Brakes
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Shop: Suspension Enhancement
on Trailer Hubs and Drums
