What Type of Grease Is Needed for Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10"
Updated 11/15/2022 | Published 11/14/2022 >
Products Featured in This Question
Question:
Is Mobil 1 wheel bearing grease compatible with the grease used in the pre-greased wheel drums AKHD-545-35-EZ-K?
asked by: George A
Expert Reply:
The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased part # AKHD-545-35-EZ-K comes with a lithium based grease installed so as long as the grease you want to use has the same base there will be no issues with mixing. The color of the grease does not matter, just the base. We typically recommend the LubriMatic LMX Industrial Strength Grease part # L11390 using the LubriMatic Standard-Duty, Lever Action Grease Gun part # L30200.
It looks like most Mobile 1 greases uses a lithium base so you should be good to go just be sure to check the exact one you're using beforehand to ensure compatibility.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Determine if You Have Manual or Self-Adjusting Brakes
- Q&A: Parts Needed For Installing Electric Trailer Brakes Onto a Trition UT16 Tandem Axle Utility Trailer
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Article: Overview of Lubricating Grease
- Search Results: trailer lights
- Search Results: brake adjuster tool
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Search Results: grease
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Brake Adjustment Spoon for Drum Brakes
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: 90 Degree Wiring Harness Recommendation for Wesbar Lights # 271584 and # 271585
- Q&A: Is Red Grease Good for Boat Trailer Hubs
- Q&A: What Screws To Use When Installing E-track To the Side Of Aluminum Trailer Frame
- Q&A: Which Grease is Used on Lippert Trailer Axles
- Video: Let’s Check Out the Dexter Electric Trailer Brakes
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Search Results: bearings
- Search Results: bearing race tool
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Hitch

