Recommended Towing Mirrors For A 2023 Chevrolet Express Van

Question

Question:

I would like to install some towing mirrors onto my 2023 Chevrolet Express Van. I would like custom mirrors if I could. I am having trouble seeing around my utility trailer when working.

asked by: Sherri

0

Expert Reply:

I recommend the Longview Custom Towing Mirrors # LVT-1700 for your 2023 Chevrolet Express Van. These custom towing mirrors will slip over your vehicle's factory side view mirrors and will help extend your line of sight. The mirrors have an aerodynamic shape that will help prevent vibration and wind noise you will get when driving. The mirrors have a quick, slip on installation with no tools needed, and are manufactured in The USA.

I linked an installation video below of the Longview mirrors being installed onto a 2017 Chevrolet Express Van. The installation process will be the same for your 2023 Chevrolet Express Van. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors.

expert reply by: Noah E

0

Answer 1

If you are looking for a power source for your brake controller, I do not recommend using a fuse tap. The brake controller's power needs to be ran through an appropriately sized circuit breaker and to the battery post. The installation…

view full answer...

Answer 2

We sure do! I've linked you to a copy of the installation instructions which you can print out if you wish. I've also linked you to our Brake Controller FAQ article, which includes much more information about brake controllers and how they…

view full answer...

Answer 3

For your 2020 Chevy Express Van the slip-on tow mirrors I recommend are the Longview part #LVT-1700. These are custom fit for the mirror housings of your van which means they'll install very easily and be very secure. They also greatly improve…

view full answer...

Answer 4

If the manufacturer recommends to ground the Tekonsha PowerTrac Electronic Brake Controller part #39523 to the negative side of the battery terminal then this is what you should obey. However, we have installed hundreds of brake controllers by…

view full answer...

Answer 5

The only time you want to see power on the blue brake wire from the Curt Triflex Brake Controller part #C24VV is when the brake pedal depressed in the vehicle or the brake controller manual override is activated. If the blue wire has a constant 12V…

view full answer...

Answer 6

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

view full answer...

Answer 7

Hey Gene, so the amperage requirement of the breaker that you'll use when installing your Prodigy P2 brake controller part #90885 will be based on the amount of brake axles your trailer has but generally a 30 amp breaker is fine. For a single…

view full answer...

Answer 8

If your vehicle is equipped with a 4-Way connector, the Curt Universal Installation Kit #C57186 that you referenced includes everything needed to convert it to a fully-functional 7-Way. This includes the needed 10 gauge wire that you will connect to…

view full answer...

Answer 9

If the trailer you will be towing with your 2017 GMC Savana 2500 Van has brakes then yes, you will need to use a 7-way wiring harness and brake controller in addition to the trailer hitch, trailer wiring harness, and ball mount/hitch ball. These will…

view full answer...

Answer 10

The center pin of the 7-way is the reverse light circuit, if your trailer does not have the need for a reverse light circuit then you do not have to use it. You would just connect all of the other wires and leave that one unused. To see how a 7-way…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Towing Mirrors For A 2023 Chevrolet Express Van

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching