bing tracking image
Q & A Icon

What Does Lippert Replacement Hydraulic Power Unit # LC141111  

Published 11/25/2022

Question:

i have a 1995 automate with a 13 ft. hydraulic slide. the slide works, but trips the breaker when going in or out. i have replaced the breaker 50 amp and the solenoid on the pump motor. it is a ground type system. the info on the pump, all thats readable says 12 volt. i runs a starter motor type pump. the switch in the trailer shifts a hyd valve to move the slide in or out. the motor always runs in the same direction. if the motor and /or pump is bad, will the lippert 141111 style unit be a good replacement, or is there another unit that would work better. thanks,

0

Expert Reply:

Do you have a Lippert hydraulic slide out setup? The # LC141111 work with the IRC slide out system but you would need to verify that's what you have. This is a direct replacement for your Haldex 9SP pump.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>