What is Distance Between Top and Bottom Hole of Blue Ox Weight Distribution Shank BLU26FR

Updated 10/24/2022 | Published 10/23/2022

Products Featured in This Question

Blue Ox TrackPro Weight Distribution Shank for 2-1/2" Hitches - 9 Hole Adjustment

(31)

$270.96

Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch - 9" Long - 9 Hole Adjustment

(100)

$229.49

Question:

The hole spacing dimensions that you show for the BLU26FR donr make sense. You show the center to center dimension between the two end holes as 11.25. If there are 9 holes spaced 1.25inch apart then the center to center dimension between the two end holes would be 10inch 8 x 1.25. What is correct and how does this shank compare to BXW4028?

asked by: SHERMAN G

Expert Reply:

Your math is correct. Since the distance between the mounting holes of the Blue Ox weight distribution shank part # BLU26FR is the standard 1-1/4 inch and there is a total of 9 holes that would mean that there is 10 inches between the top and bottom hole measured on center.

The difference between the # BLU26FR and the # BXW4028 is basically non-existant but one comes with the TrackPro Systems and the other the SwayPro.

expert reply by: Jameson C