The Low-Down on the Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch Video

Since you already have the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW1000 I would not recommend buying a new one to go with your Grand Design Imagine 2970rl. The tongue weight range on that Blue Ox is 750-1,000 lbs so you're…

Hi William; you can definitely swap out your shank with #BXW4028 which fits a 2-1/2" receiver. There is no need to completely replace your weight distribution system. Another alternative is to get a reducer like the Blue Ox Hitch Reducer Sleeve…

Yes, you can. To use the Blue Ox SwayPro item #BXW1000 with a 2-1/2" receiver you will need the Blue Ox SwayPro Weight Distribution Shank item #BXW4028.

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

Your math is correct. Since the distance between the mounting holes of the Blue Ox weight distribution shank part #BLU26FR is the standard 1-1/4 inch and there is a total of 9 holes that would mean that there is 10 inches between the top and bottom…

Yes, the Curt Front Mount Trailer Hitch Receiver #C52NR is a confirmed fit for your 2024 GMC Sierra 2500. I've attached a short video below where Jake will walk you through the installation process.

The Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitch #BXW4028 weighs 25-lbs. Your current shank, the Blue Ox TrackPro Weight Distribution Shank for 2" Hitches #BLU28FR weighs 20-lbs so the change between the tow really won't…

So long as you have the needed 8-1/2 foot length across the back of your toy hauler, if you'd like you can install the Thule HideAway Awning - Direct Mount #TH490018. You'll need to be able to access the area behind the top rail where the…

Yes, the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" item #DT45508 is confirmed to fit the 2012 Ford F-350 Super Duty Dually. The factory hitch will need to be removed to install this hitch. It does accommodate the full size…

In order to attach a connector to the Curt Hitch #C15810 you would use a bracket such as the Curt #C57202, and attach your connector's mounting bracket to that. An example of this is shown in the video I've linked which shows the 7- and…

Yes, the Draw-Tite Trailer Hitch Receiver #DT45508 will fit on you 2001 Ford F-350 XL Super Duty. This will allow you to use either the 34" #RP45292 or 41" #RP45018 extension in the 2-1/2" Receiver. Do remember you will need a Wiring…

In regards to the Draw-Tite Trailer Hitch Receiver part #DT45508, the distance from the inside of each side plate is 37-1/2" per Draw-Tite. I can't say for sure what the largest spare tire size that can be used is but you can use this info…