Recommended Hitch and Wiring Harness for LED Lights on a 2022 Ford Bronco

Question

Question:

I have a 2022 Ford Bronco and I am needing a hitch and a wiring harness to pull my bolt trailer. My Bronco has LED lights and I am not sure which harness I need.

asked by: Edward

0

Expert Reply:

I have a great hitch for your 2022 Ford Bronco, it is the Draw-Tite Trailer Hitch item # DT37GR. This hitch is custom fit and bolts to your Bronco with included hardware.

I really like this hitch because of the design and strength. It does not have a crossbar and attaches directly to your bumper beam. It has the highest towing capacity of available hitches for your Bronco at 4,500 lbs.

To add a wiring harness to your Bronco you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK99VR. This custom fit harness plugs in behind your rear tail lights. It is compatible with LED lights only.

If your Bronco has incandescent bulbs use part # C87BR.

expert reply by: Jerred H

0

Answer 1

I feel the Draw-Tite Trailer Hitch Receiver #DT37GR is a better option for your 2024 Ford Bronco. This receiver has an extended tube which places the hinge pin hole 3-1/2" behind the rear bumper. This makes it easier to access and allows for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 5

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Hitch and Wiring Harness for LED Lights on a 2022 Ford Bronco

Products Featured in This Question

Continue Researching