Comparing Curt and Draw-Tite Trailer Hitch Receivers For a 2024 Ford Bronco

Question

Question:

Is the Curt or Draw-Tite trailer hitches better for my 2024 Ford Bronco?

asked by: Adam

0

Expert Reply:

I feel the Draw-Tite Trailer Hitch Receiver # DT37GR is a better option for your 2024 Ford Bronco. This receiver has an extended tube which places the hinge pin hole 3-1/2" behind the rear bumper. This makes it easier to access and allows for clearance behind the spare tire when uses hitch mounted accessories. If you off-road with your Bronco and the extended length of the receiver concerns you for the departure angel over obstacles the Curt # C76WR may be a better option. The end of the receiver does not extend past the rear bumper and places the hitch pin hole 3" inward of the rear bumper edge.

expert reply by: Bud M

0

Draw-Tite Trailer Hitch Receiver # DT37GR on Ford Bronco
(click to enlarge)

Curt Trailer Hitch Receiver # C76WR on Ford Bronco
(click to enlarge)

Answer 1

Hi Walt, Based on the measurements you provided, I would not recommend the MORryde StepAbove part #MR98RR for your trailer. I completely understand why you're interested in the 3-step model since you frequently camp on rough, uneven terrain, but…

view full answer...

Answer 2

The best option to add a hitch to your 2023 Ford Bronco is the Curt Trailer Hitch item #C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 3

Hey Travis! The Draw-Tite Max-Frame Trailer Hitch #DT37GR is engineered to be stronger than the OEM hitch you're referencing. However, that does not mean it increases the towing/tongue weight capacity of the vehicle. Many hitches are…

view full answer...

Answer 4

We have a variety of Lippert and MORryde RV step options but we'll need to do some measuring before we can determine the correct fit for your 2014 Forest River Grey Wolf Travel Trailer. You'll need to measure the width of the entry doorway…

view full answer...

Answer 5

If you have limited clearance inside the door our best option for fold down steps would be the MORryde Flip Tread RV Steps which require the least amount of clearance inside the trailer while folded up, you need 5-1/2 inches of clearance from inside…

view full answer...

Answer 6

To solve your step issue I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to 26-1/4" RV Door Frames - 8" Drop Item #MR98RR. This will bolt right onto the bottom portion of the door frame instead of the sides and has…

view full answer...

Answer 7

Yes, the Draw-Tite Hitch #DT37GR has a longer receiver than the Curt Hitch #C76WR for your 2024 Ford Bronco. When we installed these on a 2022 Bronco we found the Curt hitch pin hole to sit 1" away from the vehicle frame while the Draw-Tite sat…

view full answer...

Answer 8

Hi Derek! The Draw-Tite #DT47YR has not yet been confirmed to fit by Draw-Tite which is why we have it listed that way. It probably will fit since it works with the 2021-2024 models but I can't guarantee it. One way or another, I would get the…

view full answer...

Answer 9

Hi Stephen; the design and size of the Curt #C76WR really doesn't allow for a mounting point for the #HM40975. The only option to mount the bracket is on the bumper beam next to the hitch or on the plastic as seen in the picture below where…

view full answer...

Answer 10

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is the same thing as the 76527 hitch you already have so If it didn't fit it's not going to work. Instead, I'd recommend going with the Curt Trailer Hitch Receiver #C76WR which we…

view full answer...

Answer 11

For your 2024 Ford Bronco I recommend the Draw-Tite Max-Frame #DT37GR. This hitch has a longer receiver when compared to other models so you won't have any issues clearing the spare on the back. It also has a maximum tongue weight of 675 lbs so…

view full answer...

Answer 12

Hey Mike, to add trailer wiring to your 2024 Ford Bronco you will need one of two kits. You would want the part #C42WR if the vehicle has LED taillights or the part #C87BR if it didn't come with LED taillights.

view full answer...

Comparing Curt and Draw-Tite Trailer Hitch Receivers For a 2024 Ford Bronco

Products Featured in This Question

Continue Researching