Can Fastway e2 Weight Distribution Use 2" Hitch Ball
Updated 10/11/2022 | Published 10/10/2022
Products Featured in This Question
Question:
Can I use a 2 inch hitch ball with fast way e2 92-00-0800. If yes, what ball do you recommend. Thank you
asked by: Nancy H
Helpful Expert Reply:
Yes, the Fastway e2 Weight Distribution # FA92-00-0800 can use a 2" ball. The only requirement is that it has a 1-1/4" diameter shank and the same or higher capacity that the weight distribution system has. If you would prefer to stick with the Equal-i-zer brand (they make Fastway) you can use the # EQ91-00-6080 you were looking at. If that doesn't matter to you then I would go with the Curt # A-90.
Product Page this Question was Asked From
2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Balls
- Equal-i-zer
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Thin Walled Socket for Equal-i-zer Hitches
- Shop: 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Shop: Ratchet with 3/4" Socket for Anti-Rattle Hitch Bolts
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Replacement Snap-Up Lever for Fastway e2 Weight Distribution Systems
- Shop: 1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Q&A: Recommended Socket to Install a Ball on a Fastway e2 Hitch
- Q&A: Can I Use A Standard Ball Mount On My Equalizer Weight Distribution Hitch
- Q&A: Replacement Hitch Balls and Socket For Fastway e2 Weight Distribution Hitch System
- Video: Detailed Breakdown of the Thin Walled Socket for Equal-i-zer Hitches
- Video: Thin Walled Socket for Equal-i-zer Hitches: The Breakdown
- Video: Ultimate Overview of the 2" Hitch Ball
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Availability of Drop Shank for Curt Weight Distribution for 6 inches of Drop
- Q&A: Where on Equal-i-zer Weight Distribution System is Info to Determine Capacity
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Weight Distribution System for R-Pod Trailer
- Q&A: Recommended Short Arm Weight Distribution Hitch for V-Nose Cargo Trailer
- Article: Trailer Lighting Requirements
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Which Hitches are Made in the USA
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)